Description

3500/05-01-01-00-00-00 Transient Data Interface BENTLY
3500/05-01-01-00-00-00 Transient Data Interface BENTLY
Module Clips Drive controller servo moto

3500/05-01-01-00-00-00 Transient Data Interface BENTLY The 3500 series protection and condition monitoring system is a flexible and scalable platform for continuous online monitoring of the most critical machinery and all other machine assets used in the entire plant process, all of which can be achieved in a comprehensive system.

Reliable and compliant

Compatible and flexible

Communicate with System 1

Available options

Security certification

3500/05-01-01-00-00-00 Transient Data Interface BENTLY VGA touch screen display module is equipped with a color touch screen and I/O module, which can display important 3500 data in the machine or control room. VGA has 3500 vibration levels, system and alarm event lists, as well as module, channel, and alarm data, and nine custom display options. A pre built “custom” screen for direct, 1X, gap, and alarm settings without the need for configuration, making setup simple. There are two sizes to choose from (10 inches and 15 inches), and you can view data from up to four independent 3500 racks on one monitor. The display module also has multiple installation options, including hinged and latch panel installation. The monitor has obtained hazardous area certification.

Bently Nevada”s 3500/05-01-01-00-00-00 Transient Data Interface BENTLY Proximitor/Seismic Monitor provides four programmable channels for the 3500 system, receiving inputs from both the Proximitor and seismic sensors. Then, 3500/05-01-01-00-00-00 Transient Data Interface BENTLY adjusts the signal to provide various vibration and position measurements, and compares the adjusted signal with user programmable alarms. In addition, each channel can be programmed using 3500 rack configuration software to protect the machinery and monitor the condition of radial vibration, thrust position, expansion difference, eccentricity, acceleration, speed, shaft absolute value, and circular acceptance area parameters. The 3500 system can be used as a SIL Level 2 system and has been approved for multiple hazardous areas and specific countries/regions.

Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com

https://www.xmamazon.com

Home

https://www.plcdcs.com/

www.module-plc.com/

https://www.ymgk.com

Implementation of communication between ABC industrial robot and PLC based on DeviceNet fieldbus technology
introduction

In modern production systems, industrial robots and PLCs need to communicate and collaborate to complete production tasks. That is, the industrial robots output signals to the PLC, allowing the PLC to control related equipment to drive the robot’s front-end tools. This article mainly analyzes the communication problems between ABB industrial robots and PLC based on DeviceNet fieldbus technology. DeviceNet is a common network communication method in the field of automation. ABB industrial robots establish a network to communicate with Siemens PLC based on the DeviceNet network.

1Configure DSQC652

There are mainly 5 types of standard I/0 boards commonly used in ABB industrial robots [2]. Except for the different addresses assigned to them during setup, their configuration methods are basically the same. This article mainly analyzes the ABB standard I/0 board DS0C652, which mainly builds communication modules based on the DeviceNet network. The DS0C652 board has a distributed I/O module with 16 digital input and 16 digital output interfaces. The board is installed in the ABB industrial robot control cabinet. First, define the specific operation steps of the DS0C652 board, enter the teach pendant control panel, then enter the configuration menu (Figure 1), select the DeviceNetDevice menu, and add a template to enter Figure 2. ABB standard I/0 board is hung on the DeviceNet network, so the address of the module in the network must be set. The jumpers 6 to 12 of terminal x5 are used to determine the address of the module. The available address range is 10 to 63. Modify the parameters in the template parameters to complete the DS0C652 board settings. Click the drop-down menu to select the “Use value from template” row, select “DS0C65224VDCI/0Device”, and then the parameters that need to be set include the address of the I/0 board in the bus.

Figure 1 Configuring DSQC652

2Configure signals and parameters

After completing the DS0C652 board setting, the I/0 signal setting will be performed. Setting the I/0 signal is the basis for establishing communication with the PLC. The PLC communicates and transmits data with the ABB industrial robot through the I/0 signal and the DS0C652 board. As shown in Figure 3, in the signal configuration interface, there are many default I/0 points after the system is established. Modification is not allowed. Click “Add” to add signals. When setting input and output signals, their address range is 0~15. First, enter the signal menu in the configuration options to set the input and output types, and modify the corresponding parameters. After completing the settings, the computer prompts that you need to restart the settings. If there are multiple signals that need to be defined and the waiting time is long after restarting multiple times, you can click “Cancel” and wait for all signals to be defined before clicking the “Yes” button to restart. After the signal settings are completed, click to select “Input and Output” in the ABB menu to check whether all signals have been set.

Figure 2 Configure DSQC652 parameters

Figure 3 Signal parameter settings

During the signal establishment process, attention should be paid to the DSoC652 port and PLC port addresses used, and the corresponding address table should be established, as shown in Table 1. The robot interacts with the PLC through I/O signals. During the setting process, there must be no errors in the port and address number of the PLC connected to the DSoC652. If the address is set incorrectly, the communication between the robot and the PLC will not work properly.

The entire robot teaching pendant setting process is shown in Figure 4.

3BSE028140R0065 ABB Tension controller
3BHE037649R0101 ABB Industrial control module
3BHE025335R0121 ABB CP Power electronic module
3BHE019633R0101 ABB Power system module
3BHE042816R0101 ABB System power module
3BHE032025R1101 ABB Central processing unit
3BHE025541R0101 ABB Robot system spare parts
3BHE025541R0101 ABB Processor unit
NPCT-01C ABB Channel digital input
NMTU-21C 3BSE017429R1 ABB Thermal resistance power module
NF93A-2 HESG440280R2 ABB Power electronic module
NDCU-12C NDCU-12CK ABB  Analog input subroutine
MSR04X1 ABB DCS power module
MC91 HESG440588R4 HESG112714/B ABB  Pulse amplifier plate
3BHL000986P7000 ABB Processor end module
SG13433241070 ABB  Modular redundant controller
GJR5252300R3101 ABB Communication control panel
3BHE046836R0101 ABB  Controller system in stock
3BHE022294R0103 ABB  Central processing unit
3BHE022294R0103 ABB Processor unit
PPD113-B03-23-111615 ABB  Central processing unit
PP835 3BSE042234R1 Touch screen
ABB PP825A 3BSE042240R3 Touch screen
PP815A 3BSE042239R2 ABB Man-machine interface
PP836 3BSE043449R501 ABB Man-machine interface
PP820 3BSE042243R1 ABB Function key panel
TRICONEX 3805E Signal input/output module
PP826 3BSE042244R1 ABB Function key panel
SCHNEIDER TSXCUSBMBP  PLC control system
RELIANCE ELECTRIC WR-D4008 Digital input module
RELIANCE ELECTRIC S-D4043 Distributed control system
RELIANCE ELECTRIC S-D4041  Programmable control system
RELIANCE ELECTRIC S-D4012 Channel analog input
RELIANCE ELECTRIC S-D4007 Programmable control system
RELIANCE ELECTRIC S-D4006   Multifunctional controller
NI SCXI-1520 strain input module
NI SCXI-1127  Multiplexer switch module
NI SCXI-1125 Voltage input module
NI SCXI-1000  SCXI Chassis NI
LAETUS LLS570-05 Laser scanner
GE WESDAC D20ME Digital input module
GE WES5302-150 I/O communication modules
GE WES5162 frame
GE WES5302-111 Distributed control system
GE WES5162-9101 Frame interface module
GE WES5123-2600 Analog output module
WES5123-1200 GE Analog input module
WES5120 5120-1106 GE Serial communication module
WES5120 5120-1506 GE Field controller master unit
PRG-MODEM GE 8-channel digital input
WES13-3 GE  Pressure regulating device main control board
DL-1200/RTU GE Digital input module New spot
GE D20 MIC 10BASE-T I/O moduleFresh spot
Framework of GE  D20 EME Fresh spot
GE D20 EME 10BASE-T I/O unit module New spot
D20 EME GE Analog input module Fresh spot
XV-440-10TVB-1-13-1 EATON  Man-machine interface New spot
PU512V2 3BUR001401R1 ABB Digital input card New spot
1TGE120010R1300 ABB Digital input card Fresh spot
REG216 Robot drive power supply ABB
216NG63  Analog input board ABB
S-D4041 Analog input module RELIANCE ELECTRIC
S-D4043  PLC controller RELIANCE ELECTRIC
WR-D4008 Analog input module RELIANCE ELECTRIC

Company advantage service:
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems

All kinds of module card driver controller servo motor servo motor embedded card wires and cables Power module control module is applicable to steel, hydropower, nuclear power, power generation, glass factory, tire factory, rubber, thermal power, paper making, shipping, navigation, etc

ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit

Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts

3500/05-01-01-00-00-00 Transient Data Interface BENTLY

Description

Related products