Description

1900/65A-00-01-01-00-00 Transient Data Interface BENTLY
1900/65A-00-01-01-00-00 Transient Data Interface BENTLY
Module Clips Drive controller servo moto

1900/65A-00-01-01-00-00 Transient Data Interface BENTLY The 3500 series protection and condition monitoring system is a flexible and scalable platform for continuous online monitoring of the most critical machinery and all other machine assets used in the entire plant process, all of which can be achieved in a comprehensive system.

Reliable and compliant

Compatible and flexible

Communicate with System 1

Available options

Security certification

1900/65A-00-01-01-00-00 Transient Data Interface BENTLY VGA touch screen display module is equipped with a color touch screen and I/O module, which can display important 3500 data in the machine or control room. VGA has 3500 vibration levels, system and alarm event lists, as well as module, channel, and alarm data, and nine custom display options. A pre built “custom” screen for direct, 1X, gap, and alarm settings without the need for configuration, making setup simple. There are two sizes to choose from (10 inches and 15 inches), and you can view data from up to four independent 3500 racks on one monitor. The display module also has multiple installation options, including hinged and latch panel installation. The monitor has obtained hazardous area certification.

Bently Nevada”s 1900/65A-00-01-01-00-00 Transient Data Interface BENTLY Proximitor/Seismic Monitor provides four programmable channels for the 3500 system, receiving inputs from both the Proximitor and seismic sensors. Then, 1900/65A-00-01-01-00-00 Transient Data Interface BENTLY adjusts the signal to provide various vibration and position measurements, and compares the adjusted signal with user programmable alarms. In addition, each channel can be programmed using 3500 rack configuration software to protect the machinery and monitor the condition of radial vibration, thrust position, expansion difference, eccentricity, acceleration, speed, shaft absolute value, and circular acceptance area parameters. The 3500 system can be used as a SIL Level 2 system and has been approved for multiple hazardous areas and specific countries/regions.

Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com

https://www.xmamazon.com

Home

https://www.plcdcs.com/

www.module-plc.com/

https://www.ymgk.com

In the formula, a is the design acceleration/deceleration value: s is the current actual position value of the elevator: V2 is the maximum speed of the elevator at this position.

Considering that the lifting system needs to enter the parking track at a low crawling speed when entering the end of the stroke to avoid equipment damage caused by large mechanical impact, therefore, when there are still 1~5m away from the parking position, the lifting speed is limited to 0.5m/ below s.

Since the instantaneous speed before parking is very low, the position accuracy of the system’s parking can be relatively improved, which is particularly important when the auxiliary shaft is lifted.

2.2 Design and implementation of security protection functions

Mines have particularly strict requirements on safety and reliability of hoist control systems [5]. While ensuring high reliability of electrical control equipment, the control system also sets up multiple protections in key links where failures may occur, and detects the actions and feedback signals of these protection devices in real time.

First of all, monitoring the operating status of the elevator is the top priority in the safety protection function of the elevator control system. In the control system, the operating speed and position of the motor are monitored at all times, and the current position and speed values are compared with the system’s designed speed and position curve. Once it is found that the actual operating speed of the hoist exceeds the designed speed value, immediately Issue an emergency stop command and strictly ensure that the lifting speed is within the safe monitoring range during the entire lifting process. At the same time, position detection switches are arranged at several locations in the wellbore, and these position detection switches correspond to specific position values and corresponding speed values. When the elevator passes these switches, if it is found through encoder detection that the actual speed value and position deviate from the values corresponding to the position detection switch, the control system will also judge that it is in a fault state and immediately implement an emergency stop.

In order to determine whether the encoder connected to the main shaft of the elevator drum is normal, two other encoders are installed on the elevator. In this way, the position and speed detection values of the three encoders are always compared. Once it is found that the deviation between the detection value of one encoder and the detection value of the other two encoders exceeds the allowable range, the control system will immediately consider it to have entered a fault state and implement an emergency stop. Protective action.

3 Conclusion

The efficient and safe operation of main well equipment is an important guarantee for its function. In the application of mine hoist, the 800xA system designed speed curve, self-correction, various self-diagnosis and protection functions according to the specific process characteristics of the main shaft mine hoist, which has achieved good results in practical applications.

ROCKSON AUTOMATION MO-8-P01MO-01033
ROCKSON AUTOMATION MI-8-PO1MI_030321
ROCKSON AUTOMATION MI-8-P01MI-02016
RITTAL SK-3110
RHEINTACHO MESSTECHNIK GMBH 5750
RHEINTACHO MESSTECHNIK GMBH 5740
REXROTH AVENTICS 3460565500
RS DCF-30
POUNDFUL PF-MF-3Q9
PHONTECH SPA-1500
PHONTECH MPA 1600
LAUER-PCS-200FZ
PAN DELTA CONTROLS NAVI1560-AC
PAN ASIA TOTAL INSTRUMENT & CONTROL MODEL-P940-P-I
OMICRON OGS 3.1  REV1.01
NUNOTANI KEIKI SEISAKUSHO TYPE-PA-SPA-K118
NORIS RP51
NORIS VF500-G1
NORIS SA502-3G
NORIS MARINE SYSTEMS N3000-IMC-F
NORIS  SG-2000
NORIS NORISPEED-9702028 FMM6-1-11-K
NORIS AUTOMATION GMBH-SG-2000
NORCONTROL  NN806.3-HE220292C
NORCONTROL NA1116.1-HA220862B-B AC4-AC7
NORCONTROL AUTOMATION NA1115-HA220842-BB
NORCONTROL  NA1114-HA331256-BB
NABCO RC1A
MUSASINO LWIII-H4-LEVEL-WATCH-III
MRC MT-400
MOLYNX VIDEMECH 6000  TX6416
MIURA CB1-100
MAN DIESEL  Turbo DAU-11
KYMA  CPU-100-P-KDU-102
KONGSBURG NORCONTROL DSU-001
KYMA KDADL1-M-Port P.KDA-100
KYMA KDADL-1-P.KDA-100
KT-ELECTRIC KT-ASD
KRAL EEG44-2416
KONGSBERG WEEK-35-97-SSV-7212-242.0000
KONGSBERG SEATEX DPS 100
KONGSBERG NORCONTROL ETU003
KONGSBERG NORCONTROL  OPU 8810
KONGSBERG MRU-H-PN-MRUMMB1 SEATEX MRU
KONGSBERG GLB-91-7212-242.0000
KONGSBERG AL-100B-RPEX
KOMECO STX-SM-01
KOMECO ESP-2000-BS
KOMECO CS-08T
GE  VMIACC-0584
GE  VMIACC-5595-208
GE  VMIACC-5595-208 350-805595-208J
GE   R2E0N1A0A1T0A
GE   RXE2N0Q0J132A

Company advantage service:
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems

All kinds of module card driver controller servo motor servo motor embedded card wires and cables Power module control module is applicable to steel, hydropower, nuclear power, power generation, glass factory, tire factory, rubber, thermal power, paper making, shipping, navigation, etc

ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit

Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts

1900/65A-00-01-01-00-00 Transient Data Interface BENTLY

Description

Related products