Description

3500/93 135785-02 BENTLY overspeed protection module
3500/93 135785-02 BENTLY overspeed protection module
Module Clips Drive controller servo moto

3500/93 135785-02 BENTLY overspeed protection module The 3500 series protection and condition monitoring system is a flexible and scalable platform for continuous online monitoring of the most critical machinery and all other machine assets used in the entire plant process, all of which can be achieved in a comprehensive system.

Reliable and compliant

Compatible and flexible

Communicate with System 1

Available options

Security certification

3500/93 135785-02 BENTLY overspeed protection module VGA touch screen display module is equipped with a color touch screen and I/O module, which can display important 3500 data in the machine or control room. VGA has 3500 vibration levels, system and alarm event lists, as well as module, channel, and alarm data, and nine custom display options. A pre built “custom” screen for direct, 1X, gap, and alarm settings without the need for configuration, making setup simple. There are two sizes to choose from (10 inches and 15 inches), and you can view data from up to four independent 3500 racks on one monitor. The display module also has multiple installation options, including hinged and latch panel installation. The monitor has obtained hazardous area certification.

Bently Nevada”s 3500/93 135785-02 BENTLY overspeed protection module Proximitor/Seismic Monitor provides four programmable channels for the 3500 system, receiving inputs from both the Proximitor and seismic sensors. Then, 3500/93 135785-02 BENTLY overspeed protection module adjusts the signal to provide various vibration and position measurements, and compares the adjusted signal with user programmable alarms. In addition, each channel can be programmed using 3500 rack configuration software to protect the machinery and monitor the condition of radial vibration, thrust position, expansion difference, eccentricity, acceleration, speed, shaft absolute value, and circular acceptance area parameters. The 3500 system can be used as a SIL Level 2 system and has been approved for multiple hazardous areas and specific countries/regions.

Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com

https://www.xmamazon.com

Home

https://www.plcdcs.com/

www.module-plc.com/

https://www.ymgk.com

Human-machine collaborative robot technology from seven major companies including ABB and SIASUN
Human-machine collaborative robot is a new type of robot that can work directly side by side with humans without the need for isolation by safety fences. Human-machine collaborative robots are expected to fill the gap between fully manual assembly lines and fully automated production lines. In the past, people often talked about robots replacing human labor, but now robots are considered more of auxiliary tools. The rigid boundaries between automation and manual labor are gradually being dissolved. Efficient sensors, intelligent control technology and the most advanced software technology are integrated on the robot to ensure that humans and robots can cooperate safely without guardrails and can be flexibly applied without limiting locations and tasks. With this approach, employees can use the required number of robots at different production locations and for different purposes depending on the required piece quantity.

Advantage

Such sensitive robots can therefore be used, for example, as flexible production assistants in manufacturing and relieve employees by taking on manual work steps that previously could not be automated and were not ergonomically correct. For example, by taking on overhead tasks or lifting heavy objects, the burden on employees can be significantly reduced. Repeatable processes can be carried out with extremely high quality without the need for investments based on type or workpiece.

Representative product introduction

1.ABB’s first human-machine collaborative robot YuMi

abb’s first human-machine collaborative robot, the 14-axis robot YuMi, was announced by UL (Underwriters Laboratories) on September 22, 2015 to have obtained UL safety certification, highlighting its key safety design with human-machine collaboration capabilities. UL stated that ABB’s first dual-arm industrial robot YuMi that emphasizes human-machine collaboration has obtained the robot safety certification from UL. This not only brings indexical significance to the unit robot’s move towards human-machine interaction, but also ignites industrial momentum and provides support for the sustainable development and development of the robot industry. Popularize the use of injectable cardiotonic injections.

Tang Jiade, general manager of UL Taiwan, said, “The certification process for robots with human-machine collaboration and multiple axes is complicated. Taking YuMi’s 14-axis arms as an example, there are 14 degrees of freedom for translation and rotation. Combining them produces more With fast movements, UL relies on its professional experience in safety to simulate various failure scenarios for evaluation based on different applications of robots to ensure that the robot can not only interact smoothly with people, but also interact smoothly with people in every situation. Be able to self-detect and maintain safety and reliability.”

Cai Jingchun, associate director of ABB Taiwan’s industrial robot department, said, “ANSI/UL1740 robot and automation equipment standard is not only a commercial standard, but also a national standard recognized by the American National Standards Institute (ANSI). It has been certified by UL with global credibility, symbolizing YuMi’s Safety design has been rigorously and objectively evaluated and tested, and can lead the global industry to truly enter Industry 4.0/advanced manufacturing.”

2. Universal Robots’ flexible and safe full range of collaborative robot families

Universal Robots is a pioneer in a new segment of collaborative robots that focuses on user operability and flexibility. At the Shanghai International Automobile Manufacturing and Assembly Exhibition from August 26 to 28, 2015, Universal Robots’ full range of collaborative robot families were unveiled.

The “human-robot collaboration” function of UR robots allows employees to work safely and closely with robots. The unique force sensing allows it to automatically limit the amount of force generated during contact once it collides with a person. For example, the default force sensing upper limit is set to a force of 150 Newtons. That is, once a person comes into contact with the robot and a force of 150 Newtons is generated, the UR robot will automatically stop working. But it can also be adjusted to automatically stop working once it encounters a force as low as 50 Newtons on the working path. In addition, the UR robot has an intuitive user programming interface, and the robot movement direction can be controlled by clicking the arrows on the touch panel. For workers, simple installation, debugging, and programming can be completed without professional technical background or professional programming experience. These unique advantages have made UR robots favored by many automobile manufacturers around the world.

Universal Robots currently has three collaborative robots – UR3, UR5 and UR10. The newly launched UR3 in March 2015 is the most flexible and lightweight desktop robot on the market today that can work side by side with workers. It weighs only 11 kilograms, but has a payload of up to 3 kilograms. All wrist joints can rotate 360 degrees, and the end joints can rotate infinitely. UR5 has a dead weight of 18 kg, a payload of up to 5 kg, and a working radius of 85 cm. UR10 can carry 10 kg and has a working radius of 130cm. All three robots are renowned in the industry for their ease of programming, collaboration, safety and reliability when working with people.

It is reported that the UR robot also has an intuitive user programming interface, and you can control the robot’s movement direction by clicking the arrows on the touch panel.

3. FANUC collaborative robot CR-35iA with the largest payload

The maximum load on the wrist of the CR-35iA robot reaches 35kg, and the movement radius can reach 1813mm. As a collaborative robot, the complete safety functions allow the CR-35iA to work in the same space with people without isolation by safety fences. The excellent design also enabled the CR-35iA to win the Industrial Design Gold Award at this year’s Industry Expo, which was personally awarded by Vice Premier Ma Kai of the State Council.

ROLLS-ROYCE MARINE CCN-01 CANMAN CONTROLLER NETWORK MODULE
ROLLS ROYCE MARINE TENFJORD-AS-PC1010 DISPLAY CONTROLLER
PRECIMA PRODUCTION AB-ROLLS-ROYCE-KAMEWA 1082 WATER JET CONTROL UNIT-2
PRECIMA PRODUCTION AB-ROLLS-ROYCE-KAMEWA 1082 WATER JET CONTROL UNIT-1
PMA KS-94 TYP-9407-923-01001 TEMPERATURE CONTROLLER
PLEIGER ELEKTRONIK 362MC MULTI FUNCTION CONTROLLER
NSD CORPORATION VARILIMIT VS-10G-D-MP LIMIT SWITCH OUTPUT CONTROLLER
NSD CORPORATION VS-10B-UDNP-1-1.1-S002 CONTROLLER
NORIS AUTOMATION SG-2000 SERVO CONTROLLER
NORIS AUTOMATION GMBH-SG-2000 SERVO CONTROLLER
NAKASHIMA PROPELLER THRUSTER CONTROLLER PANEL
MURPHY SR260 SELECTRONIC LOGIC CONTROLLER
MEIYO MFT-06-0920-1 FREQUENCY CONVERTER
LILAAS LF90S-01-157-REV-A SINGLE CONTROL LEVER
LIEBHERR 917871414 X1-034 CAN MODULE
LIEBHERR 917871314 X1-033 CAN MODULE
LIEBHERR 917871114 X1-057-1 CAN MODULE
LIEBHERR 917870914 X1-017 CAN MODULE
LIEBHERR 917857414 X1-009 CAN MODULE
LIEBHERR 917852114 X1-041 CAN MODULE
LIAAEN HELITRON DC0016A IO CONTROLLER-I
LIAAEN HELITRON DC 00178 STEPPER CONTROLLER-1
LESLIE PMC-RS REMOTE SET POINT ELECTRO PNUEMATIC CONTROLLERS
KTE KT-ELECTRIC KT-PWC POWER CONTROLLER
KTE KT-ELECTRIC KT-PPC PROGRAMMABLE POWER CONTROLLER
KT ELECTRIC KT-PPC-PROGRAMMABLE-POWER CONTROLLER UNIT
KONGSBERG NORCONTROL AUTOMATION AUTOCHIEF-4 REMOTE CONTROL SYSTEM
KONGSBERG MARITIME SCU PN-329785 REV.E 336217C SEGMENT CONTROLLER UNIT
KC LTD ICCP SYSTEM IMPRESSED CURRENT CATHODIC PROTECTION CONTROL BOARD
KAWASAKI NABTESCO BTC-305-52 THRUSTER CONTROLLER
KAWASAKI HEAVY INDUSTRIES THRUSTER CONTROLLER
KAMEWA VC1S1 CONVERTER
KAMERA FINLAND TYPE-ACP9-T8000410.2 CONTROLLER PANEL
JRCS JEC-21M ENGINE CONTROLLER
JRC NCE-8000A CONTROLLER
INGERSOLLRAND INTELLISYS SSR-15-100 HP-39817655 AIR COMPRESSOR CONTROLLER
WOODWARD 505 8200-1302
WOODWARD 505 8200-1300
INGERSOLL-RAND E66268 SG INTELLISYS CONTROLLER
INGERSOLL-RAND SSR M22-150 KW INTELLISYS CONTROLLER
INGERSOLL-RAND 39875158 SG INTELLISYS CONTROLLER
IDEC IZUMI FA-2JUNIOR TYPE-PFJ-T162-T082-T081 PROGRAMMABLE CONTROLLER
HYUNDAI ELEVATOR HIDC-N4 ELEVATOR DOOR CONTROLLER BOX
HM STEIN SOHN A-067-7 MTBUS CONTROLLER
HANSHIN PMC-9020 MAIN CONTROLLER
HANSHIN ELECTRONICS HPA-9000 SERIES REMOTE CONTROLLER
GESTRA URR-3-135297K CONTROLLER
FOXBORO 43AP-PA42C-PB-PF PNEUMATIC CONTROLLER
FORTRUST C1000A SPEED CONTROLLER
EUROTHERM 3504 VAF INSTRUMENTS CONTROLLER
EBERLE PLS 511S SPEICHERPROGR STEUERUNG PROGRAMMABLE CONTROLLER
DSE DEEP SEA ELECTRONICS 4410 GENERATOR CONTROLLER

Company advantage service:
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems

All kinds of module card driver controller servo motor servo motor embedded card wires and cables Power module control module is applicable to steel, hydropower, nuclear power, power generation, glass factory, tire factory, rubber, thermal power, paper making, shipping, navigation, etc

ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit

Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts

3500/93 135785-02 BENTLY overspeed protection module

Description

Related products