Description

3500/15 106M1079-01 Transient Data Interface BENTLY
3500/15 106M1079-01 Transient Data Interface BENTLY
Module Clips Drive controller servo moto

3500/15 106M1079-01 Transient Data Interface BENTLY The 3500 series protection and condition monitoring system is a flexible and scalable platform for continuous online monitoring of the most critical machinery and all other machine assets used in the entire plant process, all of which can be achieved in a comprehensive system.

Reliable and compliant

Compatible and flexible

Communicate with System 1

Available options

Security certification

3500/15 106M1079-01 Transient Data Interface BENTLY VGA touch screen display module is equipped with a color touch screen and I/O module, which can display important 3500 data in the machine or control room. VGA has 3500 vibration levels, system and alarm event lists, as well as module, channel, and alarm data, and nine custom display options. A pre built “custom” screen for direct, 1X, gap, and alarm settings without the need for configuration, making setup simple. There are two sizes to choose from (10 inches and 15 inches), and you can view data from up to four independent 3500 racks on one monitor. The display module also has multiple installation options, including hinged and latch panel installation. The monitor has obtained hazardous area certification.

Bently Nevada”s 3500/15 106M1079-01 Transient Data Interface BENTLY Proximitor/Seismic Monitor provides four programmable channels for the 3500 system, receiving inputs from both the Proximitor and seismic sensors. Then, 3500/15 106M1079-01 Transient Data Interface BENTLY adjusts the signal to provide various vibration and position measurements, and compares the adjusted signal with user programmable alarms. In addition, each channel can be programmed using 3500 rack configuration software to protect the machinery and monitor the condition of radial vibration, thrust position, expansion difference, eccentricity, acceleration, speed, shaft absolute value, and circular acceptance area parameters. The 3500 system can be used as a SIL Level 2 system and has been approved for multiple hazardous areas and specific countries/regions.

Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com

https://www.xmamazon.com

Home

https://www.plcdcs.com/

www.module-plc.com/

https://www.ymgk.com

Orders from China and Asia have slowed down. In Q2 2019, Fanuc received 22.1 billion yen in new orders in China, down 45.83% year-on-year, slightly narrowing for two consecutive quarters; new orders in Asia excluding China were 20.2 billion yen, down 33.33% year-on-year, compared with Q1’s – 40.45% has narrowed.

2. ABB Q2 robot business situation

2017-2018 was a period of major change for ABB. In 2017, ABB acquired B&R and GE Industrial Systems to further deepen the system integration layout and strengthen the technical capabilities of control systems and servo systems. In December 2018, ABB was forced by shareholder pressure to transfer its The power grid business (the business where ABB started, but with low profit margins) was sold to Hitachi Group; in July 2019, ABB announced the sale of its photovoltaic inverter business to Italian electronics manufacturer Fime rS.pA. Through this series of actions, ABB has established its focus on robotics and automation business.

In 2019Q2, ABB’s revenue was US$7.171 billion, a year-on-year increase of 4% (comparable growth of 1%); but operating profit was only US$123 million, a year-on-year decrease of 83%, and net profit was only US$64 million, a year-on-year decrease of 91%. The profit decline in 2019Q1-Q2 was mainly due to the significant increase in non-operating expenses caused by strategic transformation, including the integration costs of the acquisition of General Electric’s industrial solutions business, which pushed up non-operating expenses, and the sale of the photovoltaic inverter business led to non-operating expenses in the second quarter. Expenses increased by approximately $455 million and eroded profit margins in the Electrical business unit and across the group.

Robot business: orders fell 9%, revenue fell 3%, and profits fell 36%

In 2019Q2, ABB’s robotics and discrete automation revenue was US$845 million, down 9% year-on-year (down 3% on a comparable basis). Operating profit was US$76 million, down 36% year-on-year; new orders were US$883 million, down 14% year-on-year (down 9% on a comparable basis); electrical product revenue increased by 22% (comparable basis increased by 4%), and orders increased by 22% ( Comparable caliber growth 5%), but profit loss; industrial automation revenue fell 2% year-on-year (comparable caliber growth 3%), orders fell 8% year-on-year (comparable caliber fell 4%), operating profit fell 13% year-on-year; motion control Orders, revenue and operating profit all increased slightly.

Orders and revenue in Asia declined slightly, with robot revenue falling by 13%.

In 2019Q2, ABB’s orders in Europe were flat, and revenue increased by 6%; in the United States, orders increased by 7%, and revenue could grow by 3%; in other regions such as Asia, orders fell by 3%, and revenue fell by 2%. In addition, the robot business revenue in Asia, the Middle East and Africa in Q2 2019 was US$306 million, a year-on-year decrease of 13%.

3. Yaskawa Electric’s Q2 robot business situation

In 2019Q2 (March-May), Yaskawa Electric’s revenue was 107.4 billion yen (a year-on-year decrease of 16.2%), and its operating profit was 7.2 billion yen (a year-on-year decrease of 58.2%). This was mainly due to the continued sluggish demand in the Chinese market and intensified competition.

Operation control and robotics revenue and profits continued to decline. In terms of revenue, the growth rates of Yaskawa Electric’s motion control business, robot business, and system integration business in Q2 were -22.5%, -10.9%, and 22.6% respectively. The motion control and robot business continued to decline, and the system integration business continued to grow; in terms of operating profit , operation control and robot profits both fell by more than 50%, and the system integration business suffered another loss.

Revenue in China continues to decline sharply. Q2 Yaskawa Electric’s revenue in China was 24 billion yen, down 29.9% year-on-year; revenue in Japan, the United States, and Europe fell 6.4%, 5.1%, and 6.9% respectively, and revenue in other parts of Asia (except China) fell 34.5%. Yaskawa Electric’s revenue share in China dropped from 27% in 2018Q2 to 22% in 2019Q2.

The growth rate of robot orders continues to decline, and the growth rate in China and Europe is picking up

In terms of business, robot orders fell by 19% in Q2 2019, and transportation control orders fell by 26%, both of which continued to expand. System integration orders increased significantly by 70%.

T8231 ICS Triplex Power Pack universal input
UMC100 ABB  Intelligent motor management
1HSB495663-2 ABB  DENSITY GAUGE
200-560-000-113  VIBRO  vibrometer
UNS0881a-P,V1 3BHB006338R0001 ABB  GDI PCB completed *PB
3500/53 133388-01 Bently Nevada Overspeed Detection Module
AI830 3BSE040662R1 ABB  Analog Input
AI820 3BSE008544R1 ABB  Analog Input
AO820 3BSE008546R1 ABB  Analog Output
TEAM BL0308  Circuit board module
CI856K01 3BSE026055R1 ABB  S100 I/O Interface
CI857 3BSE018144R1 ABB   AC 800M controllers
CTI121-P Ex 3BDH000741R1 ABB   Controller module
E69F-BI2 FOXBORO  Field Mounted Current to Pneumatic Converter
DI803 3BSE022362R1 ABB  digital input module
DEIF DU-2MKIII  Potection and Power Management multi-line
E69F-BI2-MS FOXBORO  Field Mounted Current to Pneumatic Converter
IS200AEPCH1BAA  GE  energy pitch center module
IS210BPPBH2BMD GE  Mark VI printed circuit board
IS210AEBIH3BEC GE  Mark VI printed circuit board
NDBU-95C  ABB  DDCS Branching Unit
PPD512 A10-15000 ABB  Static excitation system controller
SPFEC12  ABB  AI Module
8111 Triconex  High-Density Configuration Simple Expansion Chassis
TVD1.3-15-03  Rexroth  Power Supplies
VMIVME-7750-760000 GE Processor-Based VME Single Board
5SHY3545L0010  ABB  IGCT module
8C-PAINA1  Honeywell  I/O Controller
AO810V2 3BSE038415R1  ABB  Analog Output
BRC400  ABB  Bridge Controller
BC810  ABB  CEX-bus Interconnection Unit
CI830 3BSE013252R1  ABB  Profibus Communication Interface
DSQC652  ABB  Robot accessories
COM0032  ABB  Controller module
DX581-S  ABB  Safety Digital In./Output Module
IMMFP01  ABB  Multi-Function Processor Re
G2010 A 10.4ST ABB  Operator interface panel
HIES207036R003  ABB  Controller module
LDSTA-01  ABB  Circuit board module
SD24D492896201 ABB power-supply module
NGPS-12 ABB  Controller module
UFC911B106  ABB  Circuit board module
330930-065-01-05 Bently Nevada NSv Extension Cable
330180-91-05 Bently Nevada  3300 XL Proximitor Sensor
3500/32M  Bently Nevada  Relay Module
CX1020N000  Beckhoff  INTERFACE INPUT CARD
AGPS-21C ABB  Power Supply

Company advantage service:
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems

All kinds of module card driver controller servo motor servo motor embedded card wires and cables Power module control module is applicable to steel, hydropower, nuclear power, power generation, glass factory, tire factory, rubber, thermal power, paper making, shipping, navigation, etc

ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit

Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts

3500/15 106M1079-01 Transient Data Interface BENTLY

Description

Related products