Description

125840-02 Transient Data Interface BENTLY
125840-02 Transient Data Interface BENTLY
Module Clips Drive controller servo moto

125840-02 Transient Data Interface BENTLY The 3500 series protection and condition monitoring system is a flexible and scalable platform for continuous online monitoring of the most critical machinery and all other machine assets used in the entire plant process, all of which can be achieved in a comprehensive system.

Reliable and compliant

Compatible and flexible

Communicate with System 1

Available options

Security certification

125840-02 Transient Data Interface BENTLY VGA touch screen display module is equipped with a color touch screen and I/O module, which can display important 3500 data in the machine or control room. VGA has 3500 vibration levels, system and alarm event lists, as well as module, channel, and alarm data, and nine custom display options. A pre built “custom” screen for direct, 1X, gap, and alarm settings without the need for configuration, making setup simple. There are two sizes to choose from (10 inches and 15 inches), and you can view data from up to four independent 3500 racks on one monitor. The display module also has multiple installation options, including hinged and latch panel installation. The monitor has obtained hazardous area certification.

Bently Nevada”s 125840-02 Transient Data Interface BENTLY Proximitor/Seismic Monitor provides four programmable channels for the 3500 system, receiving inputs from both the Proximitor and seismic sensors. Then, 125840-02 Transient Data Interface BENTLY adjusts the signal to provide various vibration and position measurements, and compares the adjusted signal with user programmable alarms. In addition, each channel can be programmed using 3500 rack configuration software to protect the machinery and monitor the condition of radial vibration, thrust position, expansion difference, eccentricity, acceleration, speed, shaft absolute value, and circular acceptance area parameters. The 3500 system can be used as a SIL Level 2 system and has been approved for multiple hazardous areas and specific countries/regions.

Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com

https://www.xmamazon.com

Home

https://www.plcdcs.com/

www.module-plc.com/

https://www.ymgk.com

Nine Questions and Answers on Common Faults in ABB Industrial Robot Applications
Question 1: Under what circumstances do I need to back up my robot?

Answer: 1. After the new machine is powered on for the first time.

2. Before making any modifications.

3. After completing the modification.

4. If the robot is important, conduct it regularly once a week.

5. It is best to make a backup on a USB flash drive.

6. Delete old backups regularly to free up hard drive space.

Second question: What does the alarm message 10106 maintenance time reminder mean when the robot appears?

Answer: This is the intelligent periodic maintenance reminder of ABB robots.

Question 3: What should I do if the robot enters a system failure state when it is powered on?

Answer: 1. Restart the robot.

2. If it doesn’t work, check whether there is a more detailed alarm prompt on the teaching pendant and handle it.

3. Restart.

4. If it still cannot be lifted, try B startup.

5. If it still doesn’t work, try P startup.

6. If it still doesn’t work, try I startup (this will return the robot to factory settings, be careful).

Question 4: Can robot backup be shared by multiple robots?

Answer: No, for example, the backup of robot A can only be used for robot A, not robots B or C, because this will cause system failure.

Five questions: What files can be shared in the robot backup?

Answer: If the two robots are of the same model and configuration. You can share RAPID programs and EIO files, but they must be verified before they can be used normally.

Question 6: What is the mechanical origin of the robot? Where is the mechanical origin?

Answer: The six servo motors of the robot have a unique fixed mechanical origin. Incorrectly setting the mechanical origin of the robot will cause problems such as limited movement or malfunction of the robot, the inability to walk in a straight line, etc., and serious damage to the robot.

Question 7: How to cancel the robot 50204 motion monitoring alarm?

Answer: 1. Modify the robot action monitoring parameters (control panel – action monitoring menu) to match the actual situation.

2. Use the AccSet command to reduce the robot’s acceleration.

3. Reduce the v_rot option in the speed data.

Eight questions: What should I do if the robot alarms “50296, SMB memory data difference” when it is powered on for the first time?

Answer: 1. Select calibration in the ABB main menu.

2. Click ROB_1 to enter the calibration screen and select SMB memory.

3. Select “Advanced” and click “Clear Control Cabinet Memory” after entering.

4. Click “Close” when finished, then click “Update”.

5. Select “The control cabinet or robot has been exchanged, and the control cabinet is updated using SMB memory data.”

Question 9: How to customize the speed of robot trajectory in the RAPID program?

Answer: 1. Select program data in the main menu of the teaching pendant.

2. After finding the data type Speeddata, click New.

3. Click on the initial value. The meanings of the four variables of Speeddata are: v_tcp represents the linear operating speed of the robot, v_rot represents the rotational operating speed of the robot, v_leax represents the linear operating speed of the additional axis, v_reax represents the rotational operating speed of the additional axis, if there is no additional axis, then No need to modify the two.

4. The customized data can be called in the RAPID program.

IC697MDL250   GE
IC697MDL350   GE
IC697MDL652  GE
IC697MDL653 GE
IC697MDL671 GE
IC697MDL740 GE
IC697MDL750 GE
IC697MEM717C   GE
IC697PCM711P   GE
IC697PWR710F   GE
IC697PWR710H   GE
IC697PWR711  GE
IC697PWR720 GE
IC697PWR724 GE
IC697PWR748   GE
IC698ETM001-EM  GE
IC698ETM001-EL  GE
IC698PSA350C   GE
IC698CPE030-GJ   GE
IC698PSA100C  GE
IC698ETM001-ER  GE
IC698CPE020-KAA  GE
IC698ETM001-FT  GE
IC698PSA350E GE
IC698CRE030-EF GE
IC698CRE030-DE GE
IC698CPE020-BA GE
IC698CRE030-BB GE
IC698PSD300D GE
IC698CHS017C GE
IC698RMX016-CB GE
IC698CRE020-ED GE
IC698CPE020-CD GE
IC698CPE010-JV GE
IC698PSA350A  GE
IC698PSA100C   GE
IC698CPE020- CD   GE
IC698CHS009A  GE
IC698PSD300D  GE
IC698CPE010-AA  GE
IC698PSD300C  GE
IC698CHS009  GE
IC698CHS117C  GE
IC698CPE010  GE
IC698CPE020-AA  GE
IC698CPE020  GE
IC698CPE020-CC  GE
GE Redundant CPU Module IC698CRE030-BA
IC698CRE030-DE  GE
IC698CRE030  GE
IC698ETM001 GE
IC698PSA100D  GE
IC698PSA350 GE
IC698PSA350D  GE

Company advantage service:
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems

All kinds of module card driver controller servo motor servo motor embedded card wires and cables Power module control module is applicable to steel, hydropower, nuclear power, power generation, glass factory, tire factory, rubber, thermal power, paper making, shipping, navigation, etc

ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit

Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts

125840-02 Transient Data Interface BENTLY

Description

Related products