Description
9200-01-01-10-00 BENTLY overspeed protection module
9200-01-01-10-00 BENTLY overspeed protection module
Module Clips Drive controller servo moto
The 9200-01-01-10-00 EGD Communication Gateway Integrates process control and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits Ethernet communications with 3500 Rack Configuration Software. The 9200-01-01-10-00 also supports proprietary Bently Nevada protocol along with Modicon Modbus and Modbus/TCP protocols.
9200-01-01-10-00Communication Gateway integrates easily with process control networks and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits communications via Modbus using 3500 Rack Configuration Software. The 9200-01-01-10-00 can be configured using the 3500 Rack Configuration software to produce a custom or condensed Modbus map for communications using fixed or configurable registers. All vital rack information including direct vibration, gap, 1X, 2X, Smax, channel statuses, rack status, trip multiply, rack reset, and others can be easily communicated.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
(1) Use STEP7V5.2 configuration software and enter Hardware Configure to complete S7-300 PLC hardware configuration;
(2) Select S7-315-2DP as the main station system, import the GSD (device database) file of NPBA-12 into the STEP7 programming environment, and configure the software to configure NPBA-12 with S7-315-2DP as the main station. DP online, and select the PPO type to use. This design uses PPO4 to set the site network address. In the Profibus structure of the variable frequency drive device, ABB frequency converters use the Profibus-DP communication module (NPBA-12) for data transmission, which is mainly periodic: the host reads the input information from the slave station and sends the output information back to the slave station. , so it is necessary to call two system function blocks SFC14 and SFC15 in the PLC main program to read and write these data to achieve communication control to the frequency converter;
(3) Create a data block in the main PLC program for data communication with the frequency converter; establish a variable table for observing the real-time communication effect.
4 Inverter operation settings
After the frequency converter and PLC are connected to a network using Profibus-DP fieldbus, in addition to programming in the PLC automation system, appropriate parameter settings must also be performed on each frequency converter.
After the communication cable is connected, start the inverter and complete the setting of the inverter communication parameters.
4.1 Basic settings
(1) 51.01—Module type, this parameter displays the module model detected by the transmission device. Its parameter value cannot be adjusted by the user. If this parameter is not defined, communication between the module and the drive cannot be established.
(2) 51.02—This parameter selects the communication protocol, “0” selects the Profibus-DP communication protocol.
(3) 51.03—This parameter is Profibu
The PPO type selected by s connection, “3” is PPO4, but the PPO type on the inverter should be consistent with the PPO type configured on the PLC.
(4) 51.04—This parameter is used to define the device address number, that is, the site address of the frequency converter. Each device on the Profibus connection must have a separate address. In this design, the two frequency converters are stations 2 and 3 respectively. [1]
4.2 Connection of process parameters
The process parameter interconnection completes the definition and connection of the corresponding parameters of the NPBA-12 dual-port RAM connector and the frequency converter, including the connection from the master station (PLC) to the frequency converter and the connection from the frequency converter to the master station (PLC). Set the following connection parameters on the frequency converter.
(1) PZD value sent from PLC to transmission inverter
PZD1—control word, such as start enable, stop, emergency stop and other control commands of the frequency converter;
PZD2—frequency setting value of the inverter.
(2) PZD value sent from the transmission inverter to the PLC
PZD1—status word, such as alarm, fault and other inverter operating status;
PZD2—actual speed value, current actual value, etc. of the frequency converter.
5 Conclusion
After the inverter control system adopts the Profibus-DP fieldbus control mode, the entire system not only has strong reliability and is easy to operate, but also can be flexibly modified according to process needs. After this system was applied in Jigang Baode Color Plate Co., Ltd., it has been running well and has provided a successful example for the future automation equipment (network communication of different manufacturers) of the head office.
New technology from Swiss ABB Group: Complete car charging in 15 seconds
This technology can charge a car in 15 seconds
The Swiss ABB Group has developed a new electric bus technology that can complete vehicle charging in 15 seconds . No other company’s battery technology can achieve this performance.
ABB has developed a technology called “Flash Charging” that allows an electric bus with 135 passengers to charge at charging points along the route. The charging point has a charging power of 400 kilowatts and is located above the vehicle. The charging point is connected to a moving arm controlled by a laser and can charge the car battery in 15 seconds. Its minimal design will help protect the urban environment and surrounding landscape.
The idea behind this design is to give the electric bus enough power to travel to the next charging station after one charge. The end of the line will allow for long periods of full charging, with the car able to travel longer distances on a full charge. In addition to faster charging times, the system uses a carbon-emission-free solution called TOSA to obtain electricity from clean hydroelectric power stations.
ABB initially plans to use this technology between Geneva Airport and the Palexpo International Convention and Exhibition Center. If the test is successful, it will be deployed to public transportation systems. This is more cost effective and environmentally friendly.
ABB Executive Chief Technology Officer Claes Rytoft said: “With flash charging, we can trial a new generation of electric buses for large-scale transportation in cities. This project will provide greater flexibility, cost-effectiveness and flexibility.” Paving the way for a lower public transport system while reducing pollution and noise.”
3BSE092689R1 CI 867AK01 Modbus TCP interface
MU-CTVF11 HONEYWELL Vertical Trim Panel Set – Full Height
MU-CTVH11 HONEYWELL Vertical Trim Panel Set – Half Height
MU-SMAC02 HONEYWELL Analog Output Standby Manual
MU-SMDC02 HONEYWELL Digital Output Standby Manual
MU-KSX152 HONEYWELL SDISI FTA EIA – 485 Cable
MU-MASX02 HONEYWELL Manual/Auto Station
MU-MASX02 HONEYWELL Manual/Auto Station
MC-TSIA12 HONEYWELL MU-TSIA12 Serial Interface FTA for Allen-Bradley
MC-TSIM12 HONEYWELL MU-TSIM12 Serial Interface FTA for Modbus
MC-TSDU02 HONEYWELL MU-TSDU02 Serial Device Interface FTA for UDC 6000
MC-TSDM02 HONEYWELL MU-TSDM02 Serial Device Interface FTA for Manual/Auto Station
MC-TSDT02 HONEYWELL MU-TSDT02 Serial Device Interface FTA for Toledo Scale
PCI-7813R Digital reconfigurable I/O devices
MC-TDOY63 HONEYWELL MU-TDOY63 Digital Output Relay FTA (16 Outputs)
MC-TDOY62 HONEYWELL MU-TDOY62 Digital Output 24 Vdc FTA (32 Outputs)
MC-TDOR62 HONEYWELL MU-TDOR62 Digital Output 240 Vac/125 Vdc Relay FTA
MC-TDOR52 HONEYWELL MU-TDOR52 Digital Output 120 Vac/125 Vdc Relay FTA
MC-TDOD62 HONEYWELL MU-TDOD62 Digital Output 5-200 Vdc Solid State
MC-TDOD63 HONEYWELL 51309154-275 MU-TDOD63 Digital Output 31-200 Vdc Solid-State
MC-TDOD54 HONEYWELL MU-TDOD54 Digital Output 3-30 Vdc Solid-State FTA
MC-TDOD53 HONEYWELL 51304650-250 Digital Output FTA SS relay
MC-TDOA53 51304648-275 HONEYWELL MU-TDOA53 Digital Output
MC-TDIY62 HONEYWELL MU-TDIY62 Digital Input 24 Vdc FTA
MC-TDID72 HONEYWELL MU-TDIA62 Digital Input 24 Vdc FTA
MC-TDID52 HONEYWELL MU-TDIA72 Digital Input 24 Vdc FTA
MC-TDIA72 HONEYWELL MU-TDIA72 Digital Input lsolated 120 Vac FTA -Packaged
MC-TDIA52 HONEYWELL Digital Input lsolated 120 Vac FTA MU-TDIA52
MC-TAOY53 HONEYWELL MU-TAOY52 Analog Output 16 FTA
MC-TAOY52 HONEYWELL Analog Output 16 FTA MU-TAOY52
MC-TAOX52 HONEYWELL Analog Output FTA MU-TAOX52
MC-TPIX52 HONEYWELL Pulse Input FTA MU-TPIX52
MC-TSTX53 HONEYWELL Smart Transmitter Interface FTA for Redundancy MU-TSTX53
MC-TAIH53 HONEYWELL High Level Analog Input FTA MU-TAIH53
Honeywell MC-TSTX13 Smart Transmitter Interface FTA for Redundancy MU-TSTX13
MC-TSTX03 Smart Transmitter Interface FTA MU-TSTX03
Honeywell MC-TAIH13 High Level Analog Input FTA for Redundancy MU-TAIH13
MC-TAIH03 High Level Analog Input FTA MU-TAIH03
Honeywell MC-TAIH12 High Level Analog Input MU-TAIH12
MC-TAIH02 High Level Analog Input MU-TAIH02
Honeywell MU-KFTA05 FTA I/O Cable 5M
MC-ILDX03 Long Distance I/O Link Extender Pair MU-ILDX03
Honeywell MC-IOLX02 I/O Link Extender Pair−Remote Location MU-IOLX02
MC-IOLM02 I/O Link Extender Pair−Main Location MU-IOLM02 51304419-150
Honeywell MU-PFPX01 Blank Filler Plate for I/O Slot
Honeywell MC-PDOY22 Digital Output 32 Processor MU-PDOY22 80363975-150
Honeywell MC-PDOX02 Digital Output Processor MU-PDOX02
Honeywell MC-PDIY22 Digital Input 24 Vdc Processor 80363972-150 MU-PDIY22
Honeywell MC-PDIS12 Digital input processor MU-PDIS12
Honeywell MC-PDIX02 Digital Input Processor MU-PDIX02
Honeywell MC-PAOX03 Analog Output Processor 80363969-150
Honeywell MC-PAOX03 Analog Output Processor
MC-TAIH52 HONEYWELL High Level Analog Input/STI FTA
honeywell MC-PPIX02 Pulse Input Processor (8 Inputs) MU-PPIX02
honeywell MC-PRHM01Remote Hardened Multiplexer IOP MU-PRHM01
honeywell MC-PAIL02 Analog input processor 51304362-350
honeywell MC-PLAM02 Analog Input Multiplexer Processor MU-PLAM02
Honeywell MC-PSIM11 Serial Interface Processor (16 Points/Port) 51304362-350
honeywell MC-PSDX02 51304362-250 Output 8-Point Processor MU-PSDX02
honeywell Processor 16 Inputs MC-PSTX03 51304516-250
honeywell MC-PDIX02 51304362-150 Analog input module
SAIA PCD3.W315 Number of inputs (channels)
DELTA TAU PMAC-2-ACC8T Control board
Automotion ALC12DE-010-1312 Automatic motion servo amplifier
PTM PSMU-350-3 Drive sensor
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
