Sale!

125840-02 Temperature monitor BENTLY

¥900.00

Category:
  • Email:3221366881@qq.com
  • Phone:+86 17750010683
  • Whatsapp:+8617750010683

Description

125840-02 Temperature monitor BENTLY
125840-02 Temperature monitor BENTLY
Module Clips Drive controller servo moto

125840-02 Temperature monitor BENTLY The 3500 series protection and condition monitoring system is a flexible and scalable platform for continuous online monitoring of the most critical machinery and all other machine assets used in the entire plant process, all of which can be achieved in a comprehensive system.
Reliable and compliant
Compatible and flexible
Communicate with System 1
Available options
Security certification
125840-02 Temperature monitor BENTLY VGA touch screen display module is equipped with a color touch screen and I/O module, which can display important 3500 data in the machine or control room. VGA has 3500 vibration levels, system and alarm event lists, as well as module, channel, and alarm data, and nine custom display options. A pre built “custom” screen for direct, 1X, gap, and alarm settings without the need for configuration, making setup simple. There are two sizes to choose from (10 inches and 15 inches), and you can view data from up to four independent 3500 racks on one monitor. The display module also has multiple installation options, including hinged and latch panel installation. The monitor has obtained hazardous area certification.
Bently Nevada”s 125840-02 Temperature monitor BENTLY Proximitor/Seismic Monitor provides four programmable channels for the 3500 system, receiving inputs from both the Proximitor and seismic sensors. Then, 125840-02 Temperature monitor BENTLY adjusts the signal to provide various vibration and position measurements, and compares the adjusted signal with user programmable alarms. In addition, each channel can be programmed using 3500 rack configuration software to protect the machinery and monitor the condition of radial vibration, thrust position, expansion difference, eccentricity, acceleration, speed, shaft absolute value, and circular acceptance area parameters. The 3500 system can be used as a SIL Level 2 system and has been approved for multiple hazardous areas and specific countries/regions.

Contact: Mr. Lai 
Wechat:17750010683 
Whats app：+86 17750010683 
Skype：+86 17750010683 
QQ: 3221366881 
3221366881@qq.com

https://www.xmamazon.com

https://www.xmamazon.com

Home

Home

https://www.plcdcs.com/

www.module-plc.com/

https://www.ymgk.com

user experience

Secondly, if power system engineers are to consider the convenience and speed of using the product in the future, operability needs to be improved while ensuring stability. This requires a simple self-service system and an operation interface with good visual effects that can meet the needs of users. Some operating habits and other aspects

* cut costs

Furthermore, since there are many nodes in the power system, the same product needs to be deployed on many nodes. Then when the quantity of required products increases, cost issues will inevitably be involved. How to solve the research and development, construction and installation of products and better reduce operating expenses is also a major issue that ABB needs to consider.

Implementation of communication between Omron vision system and ABB industrial robot

introduction

In modern production processes, vision systems are often used to measure and identify products, and then the results are transmitted to industrial robots for work through communications . In this process, communication settings are very important. This article analyzes the communication implementation process between the Omron FH-L550 vision system and ABB industrial robots. The main task is to enable the vision system to provide data detection results for ABB industrial robots, and the industrial robots perform related operations based on the data results. This article mainly discusses the entire process of visual system communication transmission implementation.

1Ethernet-based communication settings in vision software

The main communication methods of Omron FH-L550 vision system controller are as follows [2], namely: parallel communication, PLCLINK communication, Ethernet communication, EtherCAT communication, and protocol-free communication. These five communication methods have their own characteristics in the communication process. In modern equipment, Ethernet communication (Ethernet communication) is the most common, so this article uses the Ethernet communication method as an example to analyze and explain.

First, select the “Tools” option in the main interface, select the “System Settings” menu (Figure 1), after entering the “System Settings” menu, click the “Startup Settings” option, and select the “Communication Module” tab (Figure 2 ), after completing the above settings, return to the main interface to save the settings (Figure 3). Finally, select the function menu to perform system restart settings, and wait for the system to complete the restart before proceeding to the next step.

After the system restarts, click the “System Settings” menu again and select the “Ethernet (No Protocol (UDP))” option (Figure 4). In this option, there will be parameter settings such as IP address and port. What needs to be noted here are the two IP address parameters. The parameters in “Address Setting 2” need to be filled in. The information that needs to be filled in includes the IP address of the vision controller, subnet mask, default gateway and DNS server.

In the port number setting of “Input/Output Settings” at the bottom of the menu, set the port number for data input with the sensor controller. Note that the port number should be the same as the host side, and finally complete the settings and corresponding data saving work.

2ABB industrial robot communication settings

First, configure the WAN port IP address for the ABB industrial robot. Select the control panel in the teach pendant, then select configuration, then select communication in the theme, click IPSetting, set the IP information and click “Change” to save the IP information.

Next, use the SocketCreate robot command to create a new socket using the streaming protocol TCP/IP and assign it to the corresponding variable (Figure 5). Then use the SocketConnect command to connect the socket to the remote computer. After the communication connection is completed, it is necessary to send and receive information from the visual system. To send information, use the SocketSend instruction to send data instructions to the remote computer. After the vision system collects information and makes judgments, the industrial robot system will receive data from the remote computer. The data reception is completed using the SocketReceive instruction. This instruction stores the data in the corresponding string variable while receiving the data. Useful information needs to be extracted from the received data information, which requires StrPart to find the specified character position instruction, extract the data at the specified position from the string, and assign the result to a new string variable. Finally, when the socket connection is not in use, use SocketCloSe to close it.

330100-90-01  Bently Nevada  Preprocessor system
330100-90-00  Bently Nevada  3300 Preprocessor sensor
330703-000-070-10-02-05  Bently Nevada  11mm probe
330106-05-30-10-02-00  Bently Nevada  3300 XL 8 mm reverse mount probe
330104-00-05-10-02-CN  Bently Nevada  3300 XL 8mm access probe
330103-00-04-10-02-00  Bently Nevada  3300 XL 8mm access probe
24765-02-00  Bently Nevada  Enclosure Expansion Sensor Assembly
9200-06-02-10-00  Bently Nevada  Dual wire sensor
3500/25 149369-01  Bently Nevada  Enhanced Keyphasor module
190065A-01-01-01-00-00  Bently Nevada  Universal equipment monitor
3500/22M 288055-01 BENTLY New transient data interface module
BENTLY 3500/22M 138607-01 Transient Data Interface Module
BENTLY 2300/25-00 2300/20 Vibration Monitors
BENTLY NEVADA 60M100-00 Bentley detector module
BENTLY 60M100-00 Detector module
60M100-00 BENTLY Detector module
125680-01 BENTLY  Communication card piece
125720-01 BENTLY System module
125800-01 BENTLY Medium voltage circuit board
133300-01 BENTLY Analog output module
136188-01 BENTLY I/O Module
146031-01 BENTLY Mainboard of the I/O module
3500/05-01-03-00-00-00 BENTLY rack
3500/15 133292-01 BENTLY Power module
3500/25 184684-01 BENTLY Key phase module
3500/40M 176449-01 BENTLY Displacement monitor
3500/42M 176449-02 BENTLY Shaft vibration module
3500/44M 176449-03 BENTLY System I/O module
3500/92 136180-01 BENTLY Communication gateway module
3500-05-01-02-00-00-01 BENTLY 3500 rack
136719-01 BENTLY I/O module
125768-01 BENTLY RIM I/O module
125760-01 BENTLY Data Manager I/O Module
3500/32 125712-01 BENTLY 4 channel relay module
3500/20 125744-02 BENTLY Rack interface module
3500/33 BENTLY Relay 16 channel module
3500/50 BENTLY Rotating speed module
3500/25 149369-01 BENTLY
60M100-00 BENTLY Main control panel
60M100-00 BENTLY Servo drive driver
106M1081-01 BENTLY 3500/15 fittings
106M1081-01 BENTLY Controller module
330180-50-00  Bently Nevada  3300 XL Proximitor Sensor
230025-00  Bently Nevada  Series Vibration Monitor
330130-075-00-CN  Bently Nevada  Extension Cable
330106-05-30-15-02-CN  Bently Nevada  3300 XL 8 mm Proximity Probes
330103-00-06-10-02-05CN  Bently Nevada  3300 XL 8 mm Proximity Probes
3500/40M 140734-01 Bently Nevada  Proximitor Monitor I/O Module
60M100-00   Bently Nevada   Programmable logic controller processor
3500/22M 138607-01   Bently Nevada  Standard Transient Data Interface Module
3500/61   Bently Nevada   Temperature Monitors
330101-00-08-20-12-05   Bently Nevada   3300 XL 8mm Proximity Transducer Probe
146031-01  Bently Nevada Transient Data Interface I/O Module
350005-02-04-00-00-00   Bently Nevada   DC IN Card Input Module
330930-065-01-05  Bently Nevada   NSv Extension Cable
330180-51-00   Bently Nevada   3300XL Proximitor Sensor
330130-040-00-00   Bently Nevada 3300 XL Standard Extension Cable
149992-01   Bently Nevada   16 Channel Relay Output Module
126615-01   Bently Nevada   Proximitor I/O Module
330105-02-12-05-02-00 Bently Nevada Reverse Mount Probes
330930-065-01-05  Bently Nevada   NSv Extension Cable
16710-30   Bently Nevada 16710 Interconnect Cables
330180-51-05   Bently Nevada 3300 XL Proximitor® Sensor
330709-000-050-10-02-00  Bently Nevada  3300 XL 11 mm Proximity Probes
330106-05-30-05-02-00  Bently Nevada  3300 XL 8 mm Reverse Mount Probes

Company advantage service:
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
All kinds of module card driver controller servo motor servo motor embedded card wires and cables Power module control module is applicable to steel, hydropower, nuclear power, power generation, glass factory, tire factory, rubber, thermal power, paper making, shipping, navigation, etc

ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit

Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts

Related products