Sale!

1701/10-01 BENTLY vibration monitoring system

¥900.00

1701/10-01 BENTLY vibration monitoring system
Brand: BENTLY
Name: Module
Current: 5A
Voltage: 24V
Mode of use: Hot plug implementation
standard: Import
origin: United States

Category:
  • Email:3221366881@qq.com
  • Phone:+86 17750010683
  • Whatsapp:+8617750010683

Description

1701/10-01 BENTLY vibration monitoring system
1701/10-01 BENTLY vibration monitoring system
Module Clips Drive controller servo moto

1701/10-01 BENTLY vibration monitoring system The 3500 series protection and condition monitoring system is a flexible and scalable platform for continuous online monitoring of the most critical machinery and all other machine assets used in the entire plant process, all of which can be achieved in a comprehensive system.
Reliable and compliant
Compatible and flexible
Communicate with System 1
Available options
Security certification
1701/10-01 BENTLY vibration monitoring system VGA touch screen display module is equipped with a color touch screen and I/O module, which can display important 3500 data in the machine or control room. VGA has 3500 vibration levels, system and alarm event lists, as well as module, channel, and alarm data, and nine custom display options. A pre built “custom” screen for direct, 1X, gap, and alarm settings without the need for configuration, making setup simple. There are two sizes to choose from (10 inches and 15 inches), and you can view data from up to four independent 3500 racks on one monitor. The display module also has multiple installation options, including hinged and latch panel installation. The monitor has obtained hazardous area certification.
Bently Nevada”s 1701/10-01 BENTLY vibration monitoring system Proximitor/Seismic Monitor provides four programmable channels for the 3500 system, receiving inputs from both the Proximitor and seismic sensors. Then, 1701/10-01 BENTLY vibration monitoring system adjusts the signal to provide various vibration and position measurements, and compares the adjusted signal with user programmable alarms. In addition, each channel can be programmed using 3500 rack configuration software to protect the machinery and monitor the condition of radial vibration, thrust position, expansion difference, eccentricity, acceleration, speed, shaft absolute value, and circular acceptance area parameters. The 3500 system can be used as a SIL Level 2 system and has been approved for multiple hazardous areas and specific countries/regions.

Contact: Mr. Lai 
Wechat:17750010683 
Whats app：+86 17750010683 
Skype：+86 17750010683 
QQ: 3221366881 
3221366881@qq.com

https://www.xmamazon.com

https://www.xmamazon.com

Home

Home

https://www.plcdcs.com/

www.module-plc.com/

https://www.ymgk.com

3.3 Design of computer control software

This type of control software runs on the computer and is mainly used for remote operation. It has multiple functions such as parameter setting, control operation, data collection and storage, status detection and alarm, etc. Its interface is shown in Figure 3.

The system shown in Figure 3 contains four independent control channels, and the software can manage and configure the test plan based on parameter information. That is: for each test plan, you can configure different test plans and set different test parameters through the “Configuration” operation. You can also create new plans, save and modify plans, open existing plans, and delete plans.

The software also sets up quick operations, which can quickly start and stop work according to the channel configuration, and can detect the working status of each channel in real time.

3.4 Design of touch screen software

The touch screen software is mainly used for local control and runs in the touch screen controller. While the computer control software has similar functions, it also has the setting function of local control priority or remote control priority. The default is remote control priority. The login interface and test operation interface are shown in Figure 4 and Figure 5 respectively.

3.5 Design of PLC software

As the core of this control system, PLC is mainly responsible for the following aspects:

Responsible for sending corresponding control parameters and instructions to the frequency converter, and at the same time obtaining the status of the transmission system through the ProfibusDP bus protocol.

Communicates with the touch screen through serial communication, responds to local control instructions, and feeds back system status to the touch screen as a slave computer for local control. Programming between the touch screen and PLC is performed by directly accessing the PLC variable address.

It communicates with the remote control computer through the OPC[5] communication method based on the external network, responds to the remote control instructions, and feeds back the system status to the remote control computer as the remote control slave. Programming between the remote control program and the PLC is performed by accessing the PLC variable name.

Process the emergency signal and control the inverter to slow down and unload according to the default parameters.

Figure 4 Login interface

Figure 5 Test interface

3.6 Frequency converter settings

In general, the inverter will be equipped with an optional operation panel. Before using the local or remote control program to operate the inverter, you must first perform the basic settings of the inverter, as follows:

Switch the control mode to local control and set the inverter address according to the inverter user manual.

Set the inverter for remote control and select the communication mode.

Set the frequency converter to use an encoder, and connect the motor for self-test matching operation.

Set the speed control mode of the inverter, such as speed control or torque control.

After completing the basic parameter settings, switch to the remote control state and wait for remote control.

4 Conclusion

This system implements a universal belt-turning mechanism that utilizes frequency conversion control technology. You can use the local touch screen to control the inverter to control the motor rotation and obtain corresponding feedback, or you can use remote control to control the inverter to achieve the same control effect as the local touch screen, even in view of the computer function The richness allows you to obtain more system information and set more control states. In addition to local touch screen control and remote control, the overall structure of this system can also be split into the most basic transmission structure to complete the control, that is, the motor is controlled directly through the control panel of the frequency converter to achieve the most basic and direct control. Therefore, this system can be used as a basic framework structure to meet all similar control requirements, and obtain different levels of usage requirements through different levels of hardware configuration, which has universal reference significance.

Usb-5133 8-bit USB oscilloscope device
PCI-6040 Multi-function I/O device
PCI-5105 oscilloscope/digitizer
PCI-8511 Single or dual-port low-speed/fault-tolerant CAN interface device
PCI-8513 Fieldbus CAN device
PCI-8512 high-speed/FD CAN interface device
PCI-6221 16-bit multi-function I/O device
PCI-6071 Multi-function I/O device
PCI-7813 Digital reconfigurable input/output device
PCI-7811 Multi-function I/O device
PCI-5640 intermediate frequency transceiver device
PCI-6036E Multi-function DAQ device
PCI-6035 Multifunctional DAQ device
PCI-8516 PCI Bus interface board
TP857 3BSE030192R1 substrate unit
XVS-440-10MPI-1-1AD EATON Operator interface panel
ZYGO 7714 8070-0279-01 Interferometer
4351B TRICONEX Communication Modules
RELIANCE Y-3023-2-H00AA Brushless servo motor
3BHE005555R0101 LDSYN-101 Printed tape circuit board
IS215ACLEH1B GE EX2100 Excitation Controller
GE 04220FL11232A RXI CONTROLLER Dominate industry
FCP270 P0917YZ Field Control Processor 270
FC-TSHART-1620M UNIVERSAL SAFETY INTERFACE
Cutler-Hammer C825KN10 3 Pole Contactor
3500/22M Transient data interface
XVC768115 3BHB7211R115 Printed circuit board
“ABB UNITROL 1005-0011 ECO 3BHE043576R0011 Indirect Excitation Systems”
ABB SYNCHROTACT 5 3BHB006713R0217 microprocessor Supplied by XIONGBA
ABB SAM3.0 counter Supplied by XIONGBA
REF620E_F NBFNAANNNCC1BNN1X Feeder protection and control relay
PCD235B1101 3BHE032025R1101 Supplied by XIONGBA
3500/92 Communication Gateway xiongba Automation
3500/62 6 channel monitor Supplied by XIONGBA
3500/61 Thermocouple temperature input xiongba Automation
3500/60 temperature detector  Supplied by XIONGBA
3500/53 Electronic Overspeed Detection System xiongba Automation
3500/42M Proximitor Seismic Monitor Supplied by XIONGBA
3500/33 16 channel relay module XIONGBA supply
3500/32 4 Channel Relay Module Supplied by XIONGBA
3500/25 Enhanced Keyphasor Module XIONGBA Industries
3500/15 Power module of half height Supplied by XIONGBA
350005-01-01-00-00-01 System Rack XIONGBA spare parts
330730-080-00-00 3300 XL 11 mm Extension Cable Supplied by XIONGBA
136180-01 COMMUNICATION GATEAWAY MODULE XIONGBA spare parts
125840-01 Ac power input module Supplied by XIONGBA
125800-01 KEYPHASOR I/O MODULE
8440-2165 SPM-D2-11 The synchronizer of a microprocessor
106M1081-01 Universal AC Power Input Module
DSTS106 3BSE007287R1 Trigger pulse Generator cassette backup regulator
DI650 3BHT300025R1 Digital input 32 channels
DSTS105 3BSE007286R1 is used to simulate a backup regulator
3500/92-02-01-00 Communication gateway
TC515V2 3BSE013284R1 AF100 Twisted pair repeater
DSAI155A 3BSE014162R1 thermocouple module
TC512V1 3BSE018059R1 RS485 Twisted pair modem
DSAO130A 3BSE018294R1 Analog output board 16 channels
DSTA155P 3BSE018323R1 Connect unit 14 thermocouple
DSTA002B 3BSE018317R1 Analog input board connection unit
DSTA135 3BSE018315R1 input board
DSTD190V1 3BSE018314R1 Connects to unit 32 Ch

Company advantage service:
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
All kinds of module card driver controller servo motor servo motor embedded card wires and cables Power module control module is applicable to steel, hydropower, nuclear power, power generation, glass factory, tire factory, rubber, thermal power, paper making, shipping, navigation, etc

ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit

Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts

Related products