Description
1900/65 Transient Data Interface BENTLY
1900/65 Transient Data Interface BENTLY
Module Clips Drive controller servo moto
The 1900/65 EGD Communication Gateway Integrates process control and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits Ethernet communications with 3500 Rack Configuration Software. The 1900/65 also supports proprietary Bently Nevada protocol along with Modicon Modbus and Modbus/TCP protocols.
1900/65Communication Gateway integrates easily with process control networks and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits communications via Modbus using 3500 Rack Configuration Software. The 1900/65 can be configured using the 3500 Rack Configuration software to produce a custom or condensed Modbus map for communications using fixed or configurable registers. All vital rack information including direct vibration, gap, 1X, 2X, Smax, channel statuses, rack status, trip multiply, rack reset, and others can be easily communicated.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
https://www.xmamazon.com
https://www.xmamazon.com
https://www.plcdcs.com/
www.module-plc.com/
https://www.ymgk.com
Design and implementation of variable frequency transmission system based on ABB hardware architecture
introduction
With the increasing development of transmission technology and the increasing demand for actual use, variable frequency transmission systems have been widely used.
As a Fortune 500 company in the world, ABB is a leader in the fields of power and automation technology and has strong capabilities in control systems, high-voltage, medium-voltage and low-voltage frequency conversion technology and transmission technology. Therefore, this article mainly relies on ABB’s control, frequency conversion and transmission technology, and uses related hardware products to design and implement the frequency conversion transmission system.
To truly design and implement a usable variable frequency drive system, the entire system must be fully equipped, conveniently operable and compatible with a wide range of needs, so that it can be used without changing the control method and operation. According to the actual control needs, that is, combining frequency converters with different performances and variable frequency motors with different speeds or torques to quickly build and realize a variety of control requirements.
1 System design purpose and composition
The design purpose of this system is to control ABB inverters through local and remote control methods and complete 4 independent channels of closed-loop speed control to drive different test objects to rotate.
The entire control system consists of the following four main components: remote control computer, panel industrial computer (touch screen), PLC and speed-regulating frequency converter. The system design block diagram is shown in Figure 1.
In order to ensure the accuracy of motor speed control, an encoder module is added. The PLC can obtain the feedback of the rotary encoder in the frequency converter through the ProfibusDP protocol. The speed control is performed through the frequency converter for internal PID closed-loop control.
2 System hardware implementation
2.1 Control some hardware
The control part of the hardware mainly refers to the sum of hardware that supports operators to use the equipment directly or indirectly and complete the functions of the equipment. Its main hardware includes computer control terminal, touch screen control terminal, PLC control unit, other auxiliary circuits and measurement and control components.
2.2 Transmission hardware
The transmission hardware mainly refers to the total number of equipment that can relatively independently perform a complete transmission function. Its main hardware includes frequency converters, variable frequency motors (configured with rotary encoders as needed) and other auxiliary circuits. Among them, the selection of motors and frequency converters should be based on the principle of selecting the motor first and then selecting the frequency converter. details as follows:
First, according to the tangential speed at which the object under test is to complete rotation, select the motor speed according to the following formula:
Secondly, choose based on several other important basic parameters of the motor, such as system hardness, torque, weight, etc. This system uses ABB’s variable frequency motor.
Finally, select an appropriate frequency converter based on the motor power. In addition, the actual situation of the object being tested must also be taken into consideration, such as whether the rotating load belongs to the heavy-load usage of the frequency converter, etc.
3Software system
System software includes three major categories in total, namely computer control software, touch screen software and PLC software. Among them, the PLC software, as the underlying software, is responsible for the interaction with the computer control software and touch screen software on the upper side, and the interaction with the frequency converter on the lower side. Therefore, from the architecture of the entire software system, it can be defined as a host and slave computer structure.
3.1 System development platform
The software system has two control methods: remote and local. The development platforms for the three major categories of software are Windows operating system, LabVIEW[4] integrated development environment, CodesysV2.3, and CP400.
3.2 System software architecture
The software of the entire system is divided into three types, namely remote control software, PLC control software and local control software. Among them, the remote control software runs under the Windows operating system and is developed under the LabVIEW integrated development environment; the PLC control software is developed under the CodesysV2.3 programming environment; the local control software runs on the touch screen computer and is developed under the CP400 environment. The relationship between the three software is shown in Figure 2.
IC694ALG392 GE 8 channel current/voltage analog output module
IC694ALG222 GE 16 channel analog voltage input module
IC693PWR331C GE High capacity power supply
IC693PWR322E GE 24/48 VDC standard power supply
IC693PWR321 GE IC693PWR321U standard power supply
IC693ALG221J GE Analog current input module
IC670GBI002 GE Field control bus interface unit
IC660HHM501N GE Handheld display
IC660BBA104K GE Genius Analog I/O module
IC200MDL740E GE VersaMax series output module
IC200MDD844 GE Mix input and output modules
HE697RTM700B GE Modbus/RTU Main channel
HE693THM166 GE Thermocouple temperature sensor
HE693RTD600 GE Input output module
HE693DAC420 GE Analog output channel
FPS400-24 FOXBORO DIN rail mounting power supply
GV6K-U6E PARKER GV6K-U6E-UK Servo drive driver
F7126 HIMA Safety system module
CE4050S2K1C0 EMERSON I/O interface carrier with carrier shielding strip
AO2040 ABB Process gas analyzer
8141649.53 SEW main board
805405-1R RELIANCE Single-phase field power module
8811-IO-DC MTL Discrete input/output module
8810-HI-TX MTL PAC8000 8 channel safety simulation input with HART
190065A-01-01-01-00-00 Bently Nevada Universal equipment monitor
8502-BI-DP MTL Bus interface module
369-HI-R-M-0-0-0-E GE Multi-wire motor management relay
0190-09379 AMAT VME PCB component CPU
140XBP01000 Schneider Rack backplane – 10 slots
DSQC647 3HAC026272-001 ABB SafeMove unit
T8846 ICS Triplex programmable controller module
V18345-1020221001 ABB Electro-pneumatic positioner TZIDC
IC698CPE030-GJ GE RX7i series CPU
IC697CPM790 GE Central processing unit
FS300R12KE3 AGDR-72C ABB IGBT module
DSQC668 3HAC028179-001 ABB Compact controller
DSQC664 3HAC030923-001 ABB Drive Unit
DSQC377B 3HNE01586-1 ABB Transport tracking unit
DS200DMCBG1AED GE DOS DUP processor board
DSCA114 57510001-AA ABB communication board
D20-PS LFDSC143-4000 GE 32-bit main processor
2711P-T12W22D9P Allen-Bradley PanelView Plus 7 High performance operator terminal
2711P-T12C4D8 Allen-Bradley Panelview Plus 6 1250 Operator term
2711P-T10C4D1 Allen-Bradley PanelView Plus 700 operator terminal
2711P-T10C4A9 Allen-Bradley Panelview Plus 6 1000 Operator terminal
2711P-T6M5D Allen-Bradley Operator interface terminal
2711P-RDT15C Allen-Bradley PanelView Plus Graphics terminal
2711PC-B4C20D8 Allen-Bradley Terminal of operator
1756-L75 Allen-Bradley ControlLogix controller
SDCS-PIN-51 ABB Measuring plate
IEMMU21 ABB Module mounting unit
5302-MBP-MCM4MB+ PROSOFT Primary/secondary gateway 4 Port
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
