Description
330704-000-040-10-02-00 Parameter settings
330704-000-040-10-02-00 Parameter settings
Module Clips Drive controller servo moto
The 330704-000-040-10-02-00 EGD Communication Gateway Integrates process control and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits Ethernet communications with 3500 Rack Configuration Software. The 330704-000-040-10-02-00 also supports proprietary Bently Nevada protocol along with Modicon Modbus and Modbus/TCP protocols.
330704-000-040-10-02-00Communication Gateway integrates easily with process control networks and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits communications via Modbus using 3500 Rack Configuration Software. The 330704-000-040-10-02-00 can be configured using the 3500 Rack Configuration software to produce a custom or condensed Modbus map for communications using fixed or configurable registers. All vital rack information including direct vibration, gap, 1X, 2X, Smax, channel statuses, rack status, trip multiply, rack reset, and others can be easily communicated.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
https://www.xmamazon.com
https://www.xmamazon.com
https://www.plcdcs.com/
www.module-plc.com/
https://www.ymgk.com
Design of ABB industrial robot deburring and grinding workstation based on RobotStudio simulation software
introduction
As an official offline programming software for ABB robots, Robotstudio not only has powerful simulation and offline programming functions, but also has automatic path generation function and simulation monitoring collision function. It can realize the simulation of robots in real scenes, so as to timely update existing robot programs. optimize. On-site teaching programming will affect normal production activities on site.
The application of Robotstudio software offline programming can reduce on-site teaching and programming time.
As a traditional process of mechanical processing, deburring and grinding have a wide range of applications. However, for a long time, in the process of manual deburring and polishing, there have been differences in operations between workers. The manual operation is not repeatable and the deburring effect is unstable, which has seriously affected the surface quality and service life of the finished product; and the working environment There is a large amount of dust floating in the air and the conditions are harsh, seriously endangering the physical and mental health of workers. With the proposal of “Made in China 2025”, intelligent manufacturing production has become an important development direction for the transformation and upgrading of the future manufacturing industry. The use of industrial robot automated production lines for repetitive batch processing operations can not only greatly improve production efficiency, but also greatly improve product quality. Yield and production stability. Therefore, before designing the robot polishing program, if the shape, size and polishing amount of the workpiece to be polished are known, the robot offline program can be written on the Robotstudio software according to the existing conditions, thereby improving the efficiency of on-site programming.
1Design task description
This task is to create a new simulation workstation in ABB robot simulation software Robotstudio. The corresponding training equipment in reality is the Yalong YL-l360A industrial robot deburring and grinding system control and application equipment. The industrial robot selection and method of the simulation workstation are The grinding head installed on the blue plate refers to the Yalong YL-l360A industrial robot deburring and grinding system control and application equipment, and the workpiece is customized. The ABB industrial robot deburring and grinding workstation simulation training process includes: creating a workstation, setting up tools, creating smart components, creating tool coordinate systems, creating trajectories, programming, simulation design, and verification.
2 Task implementation
2.1 Create a workstation
Import the robot: First, create a new simulation workstation in the Robotstudio software. The workstation name is self-named, and then import the corresponding industrial robot IRB1410. The robot position remains unchanged by default. Create a robot system, modify the system options, check 709-1DeviceNetMaster/s1ave, select Chinese as the language, and leave the other options unchanged by default, then click Confirm to create the robot system. After the robot system is created, hide the industrial robot IRB1410 to facilitate subsequent workstation operations.
Import workpiece: The workpiece here is customized, and the corresponding workpiece is selected according to the actual situation on site. This article uses the original workpiece Curvet in Robotstudio software. After importing it into the workstation, according to the reachable range of the robot, just place the workpiece at a suitable location within the reachable range of the robot, as shown in Figure 1.
Import the grinding rotor tool: First, create a new grinding rotor tool component – rotor – copy (2) and rotor – copy (2) in the so1idworks 3D software. The rotor – copy (2) is a rotatable grinding rotor. —The copy is the tool body, which is the grinding rotor frame, and is installed on the robot flange, as shown in Figure 2.
2.2 Setting tools
First, move the rotatable grinding rotor and the tool body to the local origin based on point A, and adjust the initial tool angle so that the grinding rotor is parallel to the x-axis of the geodetic coordinate system, as shown in Figure 3. Set the local origin of the tool body at this time, change the position x, y,: to 0, 0, 0, and change the direction x, y,: to 0, 0, 0.
Figure 3 Tool settings
Create a new frame at point B of the tool body, name it “frame l”, and adjust the direction of frame l so that the axis is perpendicular to the plane of point B. The specific direction is shown in Figure 4.
ADV151-P50 Yokogawa Digital Input Modules
ADV169-P00 Yokogawa Digital I/O Modules
AIP830-101/EIM Yokogawa Operation Keyboard
ANB10D-425/CU2N Yokogawa ESB Bus Node Units
AET4D-05 Yokogawa Terminal Board for Thermocouple
AAT145-S50 Yokogawa TC/mV Input Module
EB401-50 Yokogawa Bus module card
CP461-51 Yokogawa processor module
AAV144-S50 Yokogawa I/O Modules for FIO and field devices
AAI569-P00 Yokogawa Digital Output Module
1794-IB16XOB16P Flex I/O Input/Output Module
AAI169-P00 Yokogawa Digital I/O Modules
G771K201A Servo Valve MOOG
1732DS-IB8XOBV4 ArmorBlock Guard I/O DeviceNet Safety Module
1791DS-IB8XOB8 Guard I/O Devicenet Safety module
SYHNC100-NIB-22a/W-24-P-D-E23-A012 Rexroth servo drive
1769-L31 Programmable Automation Controller (PAC)
2711P-T10C4D8 PanelView Plus 6 1000 Operator Terminals
2711P-K4M20A PanelView Plus Operator terminal
94-164136-001 digital motor relay device
531X305NTBAPG1 GE NTB/3TB Terminal Board 531X Series
369-HI-0-0-0-0 GE 360 Motor Management Relay
269PLUS-D/O-100P-125V digital motor relay device
12HGA11J52 GE HGA Hinged Armature Auxiliary Relay
62K-NHCO-DH VIPA HMI YASKAWA 62K-NHC0-DH
V4550220-EN ALSTOM Control the dust collector
5SHY3545L0009 ABB Silicon controlled IGCT module
PR6426/000-010+CON021 Eddy Current Signal Converter
TB852 3BSC950263R1 ABB RCU Link Terminator
PFVI401 3BSE018732R1 ABB Millmate Controller 400
05704-A-0146 Honeywell 5704F Fire Control Card
CLS216 105996005 Compact Loop System
MVME147-013A MOTOROLA Single Board Computer
MVME51005E-0163 MVME5100 Series VME Processor Modules
87-008145-03 PARKER SERVO DRIVE 95-132VAC 50/60HZ
3500/42M 140734-02 Proximitor Seismic Monitor
330171-00-12-10-01-05 Proximity Transducer System
3500/44M-01-00 176449-03 Aeroderivitive GT Vibration Monitor
126599-01 Bently Nevada Module Internal Terminations
IS210BPPBH2BMD GE Mark VI printed circuit board
330104-00-22-10-02-05 3300 XL 8 mm Proximity Probes
PW482-11 Power Supply Module YOKOGAWA
A413240 METSO CIRCUIT BOARD MODULE ASSEMBLY
X20AIB744 B&R 4-wire strain gauge load cell
REM610C55HCNN02 ABB Motor protection relay
1B30023H01 REV6 INPUT/OUTPUT BUS TERMINATOR
1B30023H02 REV6 INPUT/OUTPUT BUS TERMINATOR
SP382-TS ABB Redundant server power module
12HFA51A42H MUTLI CONTACT AUXILIARY RELAY GE
3500/05-01-02-00-00-01 3500/05 System Rack
104X905BA603 DISPLAY PANEL FOR DCC/ SDCC BOARD GE
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
