Description
330902-00-40-10-02-00 BENTLY overspeed protection module
330902-00-40-10-02-00 BENTLY overspeed protection module
Module Clips Drive controller servo moto
The 330902-00-40-10-02-00 EGD Communication Gateway Integrates process control and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits Ethernet communications with 3500 Rack Configuration Software. The 330902-00-40-10-02-00 also supports proprietary Bently Nevada protocol along with Modicon Modbus and Modbus/TCP protocols.
330902-00-40-10-02-00Communication Gateway integrates easily with process control networks and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits communications via Modbus using 3500 Rack Configuration Software. The 330902-00-40-10-02-00 can be configured using the 3500 Rack Configuration software to produce a custom or condensed Modbus map for communications using fixed or configurable registers. All vital rack information including direct vibration, gap, 1X, 2X, Smax, channel statuses, rack status, trip multiply, rack reset, and others can be easily communicated.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
Design of ABB industrial robot deburring and grinding workstation based on RobotStudio simulation software
introduction
As an official offline programming software for ABB robots, Robotstudio not only has powerful simulation and offline programming functions, but also has automatic path generation function and simulation monitoring collision function. It can realize the simulation of robots in real scenes, so as to timely update existing robot programs. optimize. On-site teaching programming will affect normal production activities on site.
The application of Robotstudio software offline programming can reduce on-site teaching and programming time.
As a traditional process of mechanical processing, deburring and grinding have a wide range of applications. However, for a long time, in the process of manual deburring and polishing, there have been differences in operations between workers. The manual operation is not repeatable and the deburring effect is unstable, which has seriously affected the surface quality and service life of the finished product; and the working environment There is a large amount of dust floating in the air and the conditions are harsh, seriously endangering the physical and mental health of workers. With the proposal of “Made in China 2025”, intelligent manufacturing production has become an important development direction for the transformation and upgrading of the future manufacturing industry. The use of industrial robot automated production lines for repetitive batch processing operations can not only greatly improve production efficiency, but also greatly improve product quality. Yield and production stability. Therefore, before designing the robot polishing program, if the shape, size and polishing amount of the workpiece to be polished are known, the robot offline program can be written on the Robotstudio software according to the existing conditions, thereby improving the efficiency of on-site programming.
1Design task description
This task is to create a new simulation workstation in ABB robot simulation software Robotstudio. The corresponding training equipment in reality is the Yalong YL-l360A industrial robot deburring and grinding system control and application equipment. The industrial robot selection and method of the simulation workstation are The grinding head installed on the blue plate refers to the Yalong YL-l360A industrial robot deburring and grinding system control and application equipment, and the workpiece is customized. The ABB industrial robot deburring and grinding workstation simulation training process includes: creating a workstation, setting up tools, creating smart components, creating tool coordinate systems, creating trajectories, programming, simulation design, and verification.
2 Task implementation
2.1 Create a workstation
Import the robot: First, create a new simulation workstation in the Robotstudio software. The workstation name is self-named, and then import the corresponding industrial robot IRB1410. The robot position remains unchanged by default. Create a robot system, modify the system options, check 709-1DeviceNetMaster/s1ave, select Chinese as the language, and leave the other options unchanged by default, then click Confirm to create the robot system. After the robot system is created, hide the industrial robot IRB1410 to facilitate subsequent workstation operations.
Import workpiece: The workpiece here is customized, and the corresponding workpiece is selected according to the actual situation on site. This article uses the original workpiece Curvet in Robotstudio software. After importing it into the workstation, according to the reachable range of the robot, just place the workpiece at a suitable location within the reachable range of the robot, as shown in Figure 1.
Import the grinding rotor tool: First, create a new grinding rotor tool component – rotor – copy (2) and rotor – copy (2) in the so1idworks 3D software. The rotor – copy (2) is a rotatable grinding rotor. —The copy is the tool body, which is the grinding rotor frame, and is installed on the robot flange, as shown in Figure 2.
2.2 Setting tools
First, move the rotatable grinding rotor and the tool body to the local origin based on point A, and adjust the initial tool angle so that the grinding rotor is parallel to the x-axis of the geodetic coordinate system, as shown in Figure 3. Set the local origin of the tool body at this time, change the position x, y,: to 0, 0, 0, and change the direction x, y,: to 0, 0, 0.
Figure 3 Tool settings
Create a new frame at point B of the tool body, name it “frame l”, and adjust the direction of frame l so that the axis is perpendicular to the plane of point B. The specific direction is shown in Figure 4.
Display operation panel 3AUA0000040000
Display operation panel 3ASD999002B20
Display operation panel 3ASD510001C20
Display operation panel 3ASD510001C17
Display operation panel 3ASD485500A111
Display operation panel 3ASD399002B20
Display operation panel 3ASD299001B2
Display operation panel 3ASD273001-B5
Display operation panel 3ASC25H705/-7
Display operation panel 3ASC25H219B DATX133
Display operation panel 3ASC25H216A DATX132
Display operation panel 3ASC25H214 DATX130
Display operation panel 3ASC25H209/DATX100
Display operation panel 3ASC25H209 DATX110
Display operation panel 3ASC25H208 DATX100
Display operation panel 3ASC25H204/DAPU100
Display operation panel 3ASC25H204 DAPU100
Display operation panel 3ASC25H204 DAPU100
Display operation panel 3ASC25H204
Display operation panel 3ASC25H203/DAPC100
Display operation panel 3ASC25H203
Display operation panel 3AFE68300746
Display operation panel 3AFE61320946P0001 POS.A6091
Display operation panel 3ADT316300R1510 SDCS-PIN-4B
Display operation panel 3ABD10058721DX5221
Display operation panel 37911-4-0338125
Display operation panel 23BA20D
Display operation panel 216VC62a HESG324442R13/E
Display operation panel 216VC62A HESG324442R112/F
Display operation panel 216VC62a
Display operation panel 216VC62A
Display operation panel 216NG63A HESG441635R1
Display operation panel 216NG63
Display operation panel 216NG62A HESG441634R1/K
Display operation panel 216NG61A HESG441633R1
Display operation panel 216GD61a
Display operation panel 216EA62 1MRB150083R1/F
Display operation panel 216EA61b
Display operation panel 216DB61 HESG324063R100/J
Display operation panel 216DB61
Display operation panel 216AB61
Display operation panel 216AB61
Display operation panel 1VCF752000
Display operation panel 1TGE120028R0010
Display operation panel 1TGE120028R0010
Display operation panel 1TGE120021R0110
Display operation panel 1TGE120021R0110
Display operation panel 1TGE120021R0010
Display operation panel 1tge120011r1001
Display operation panel 1TGE120011R1000
Display operation panel 1TGE120010R1300
Display operation panel 1TGE120010R
Display operation panel 1TGE106170M4200
Display operation panel 1TGB302003R0003
Display operation panel 1SVR450081R0000
Display operation panel 1SVR360663R1001
Display operation panel 1SVR040000R1700
Display operation panel 1SVR011718R2500
Display operation panel 1SVR011718R2500
Display operation panel 1SNA684252R0200
Display operation panel 1SFB536068D1011
Display operation panel 1SBP260022R1001
Display operation panel 1SAR700012R0005
Display operation panel 1SAP530100R0001
Display operation panel 1SAP520100R0001
Display operation panel 1SAP173200R0001
Display operation panel 1SAP150000R0170 PM590-ETH
Display operation panel 1SAJ520000R0101 UMC100
Display operation panel 1MRS050644
Display operation panel 1MRS050644
Display operation panel 1MRS050496
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
