Sale!

3500/05-02-04-00-00-00 BENTLY vibration monitoring system

¥900.00

Category:
  • Email:3221366881@qq.com
  • Phone:+86 17750010683
  • Whatsapp:+8617750010683

Description

3500/05-02-04-00-00-00 BENTLY vibration monitoring system
3500/05-02-04-00-00-00 BENTLY vibration monitoring system
Module Clips Drive controller servo moto

3500/05-02-04-00-00-00 BENTLY vibration monitoring system The 3500 series protection and condition monitoring system is a flexible and scalable platform for continuous online monitoring of the most critical machinery and all other machine assets used in the entire plant process, all of which can be achieved in a comprehensive system.
Reliable and compliant
Compatible and flexible
Communicate with System 1
Available options
Security certification
3500/05-02-04-00-00-00 BENTLY vibration monitoring system VGA touch screen display module is equipped with a color touch screen and I/O module, which can display important 3500 data in the machine or control room. VGA has 3500 vibration levels, system and alarm event lists, as well as module, channel, and alarm data, and nine custom display options. A pre built “custom” screen for direct, 1X, gap, and alarm settings without the need for configuration, making setup simple. There are two sizes to choose from (10 inches and 15 inches), and you can view data from up to four independent 3500 racks on one monitor. The display module also has multiple installation options, including hinged and latch panel installation. The monitor has obtained hazardous area certification.
Bently Nevada”s 3500/05-02-04-00-00-00 BENTLY vibration monitoring system Proximitor/Seismic Monitor provides four programmable channels for the 3500 system, receiving inputs from both the Proximitor and seismic sensors. Then, 3500/05-02-04-00-00-00 BENTLY vibration monitoring system adjusts the signal to provide various vibration and position measurements, and compares the adjusted signal with user programmable alarms. In addition, each channel can be programmed using 3500 rack configuration software to protect the machinery and monitor the condition of radial vibration, thrust position, expansion difference, eccentricity, acceleration, speed, shaft absolute value, and circular acceptance area parameters. The 3500 system can be used as a SIL Level 2 system and has been approved for multiple hazardous areas and specific countries/regions.

Contact: Mr. Lai 
Wechat:17750010683 
Whats app:+86 17750010683 
Skype:+86 17750010683 
QQ: 3221366881 
3221366881@qq.com

https://www.xmamazon.com

https://www.xmamazon.com

Home

Home

https://www.plcdcs.com/

www.module-plc.com/

https://www.ymgk.com

The most fundamental reason for distinguishing these two motor types is that the design of the air gap magnetic field is different. So the following differences arise

The back EMF waveform is different:

BLDC: Approximate trapezoidal wave (ideal state);

PMSM: sine wave (ideal state);

The three-phase current waveforms are different:

BLDC: Approximate square wave or trapezoidal wave (ideal state);

PMSM: sine wave (ideal state);

Differences in control systems:

BLDC: usually includes position controller, speed controller and current (torque) controller;

PMSM: Different control strategies will have different control systems;

Controls are different:

BLDC: 120-degree square wave current, using PWM control;

PMSM: Positive Xuan wave current, controlled by SPWM SVPWM.

However, in actual control, brushless DC can also be controlled by FOC, and permanent magnet synchronous motors can also be controlled by square waves.

Just like the controllers of electric vehicles, I have disassembled and studied three or four. The interfaces are all the same, the control chips are different, and of course the control algorithms are also different. Electric vehicles controlled by sine waves have very low sound when starting and running, and there is no jitter during operation; but electric vehicles controlled by square waves have very obvious sounds, and the jitter during operation can also be felt. The judder is due to definite torque ripples.

Motors controlled by square waves have higher power efficiency, because motors controlled by sine waves have a lower effective voltage.

4. Control technology of permanent magnet synchronous motor

Permanent magnet synchronous motors and brushless DC motors can be operated using the same control method.

5SHY3545L0016  ABB
2213-75TSLKTB JDSU
3503E  TRICONEX
3720 TRICONEX
0504994880  ABB
CI801 3BSE022366R1  ABB  Power Supply
CI861 ABB
DS200TBQDG1AFF  GE
DS200TCQCG1BGF  GE
DTS-2079  WAVECREST
PR6423010-010-CN  EPRO
F8621A  HIMA
IC687BEM713B GE
FCP270 P0917YZ  FOXBORO
IC687BEM742 GE
MDD112D-N030-N2M-130GA0  Rexroth
MIVII1000E00HI00 GE
MMS6823 EPRO
MV65WKS-CE31022PB Seidel
3BHE032025R0101 PCD235A101 ABB
PPD113B01-10-150000 ABB
PM864A ABB
SDM010 EPRO
PPD113B03-26-100110 ABB
SR489-P5-HI-A20-E GE
T8151B ICS TRIPLEX
T8451C ICS TRIPLEX
4500 TRICONEX
3805E  TRICONEX
UAD149A0011 3BHE014135R0011 ABB
VME172PA-652SE MOTOROLA
VMIVME-7459 VMIC
VMIVME-7658  VMIC
5SDF0860H0003 ABB
81EU01E-E ABB
140CPU67160C  Schneider
369B1860G0028 GE
605-109114-003 LAM
81943A041-1  ABB  Amplifier,Thermal Conductivity Det
CC-PCNT01  HONEYWELL
DS215KLDCG1AZZ03A  GE
CC-PCNT02 HONEYWELL
DSSA165  48990001-LY  ABB
F8652X  HIMA
FBM233  FOXBORO
IC698CHS009  GE

Company advantage service:
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
All kinds of module card driver controller servo motor servo motor embedded card wires and cables Power module control module is applicable to steel, hydropower, nuclear power, power generation, glass factory, tire factory, rubber, thermal power, paper making, shipping, navigation, etc

ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit

Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts