Description
3500-20-01 BENTLY vibration monitoring system
3500-20-01 BENTLY vibration monitoring system
Module Clips Drive controller servo moto
The 3500-20-01 EGD Communication Gateway Integrates process control and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits Ethernet communications with 3500 Rack Configuration Software. The 3500-20-01 also supports proprietary Bently Nevada protocol along with Modicon Modbus and Modbus/TCP protocols.
3500-20-01Communication Gateway integrates easily with process control networks and other automation systems using both Ethernet TCP/IP and serial (RS232 / RS422 / RS485) communications capabilities. Permits communications via Modbus using 3500 Rack Configuration Software. The 3500-20-01 can be configured using the 3500 Rack Configuration software to produce a custom or condensed Modbus map for communications using fixed or configurable registers. All vital rack information including direct vibration, gap, 1X, 2X, Smax, channel statuses, rack status, trip multiply, rack reset, and others can be easily communicated.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
https://www.xmamazon.com
https://www.xmamazon.com
https://www.plcdcs.com/
www.module-plc.com/
https://www.ymgk.com
Design and implementation of variable frequency transmission system based on ABB hardware architecture
introduction
With the increasing development of transmission technology and the increasing demand for actual use, variable frequency transmission systems have been widely used.
As a Fortune 500 company in the world, ABB is a leader in the fields of power and automation technology and has strong capabilities in control systems, high-voltage, medium-voltage and low-voltage frequency conversion technology and transmission technology. Therefore, this article mainly relies on ABB’s control, frequency conversion and transmission technology, and uses related hardware products to design and implement the frequency conversion transmission system.
To truly design and implement a usable variable frequency drive system, the entire system must be fully equipped, conveniently operable and compatible with a wide range of needs, so that it can be used without changing the control method and operation. According to the actual control needs, that is, combining frequency converters with different performances and variable frequency motors with different speeds or torques to quickly build and realize a variety of control requirements.
1 System design purpose and composition
The design purpose of this system is to control ABB inverters through local and remote control methods and complete 4 independent channels of closed-loop speed control to drive different test objects to rotate.
The entire control system consists of the following four main components: remote control computer, panel industrial computer (touch screen), PLC and speed-regulating frequency converter. The system design block diagram is shown in Figure 1.
In order to ensure the accuracy of motor speed control, an encoder module is added. The PLC can obtain the feedback of the rotary encoder in the frequency converter through the ProfibusDP protocol. The speed control is performed through the frequency converter for internal PID closed-loop control.
2 System hardware implementation
2.1 Control some hardware
The control part of the hardware mainly refers to the sum of hardware that supports operators to use the equipment directly or indirectly and complete the functions of the equipment. Its main hardware includes computer control terminal, touch screen control terminal, PLC control unit, other auxiliary circuits and measurement and control components.
2.2 Transmission hardware
The transmission hardware mainly refers to the total number of equipment that can relatively independently perform a complete transmission function. Its main hardware includes frequency converters, variable frequency motors (configured with rotary encoders as needed) and other auxiliary circuits. Among them, the selection of motors and frequency converters should be based on the principle of selecting the motor first and then selecting the frequency converter. details as follows:
First, according to the tangential speed at which the object under test is to complete rotation, select the motor speed according to the following formula:
Secondly, choose based on several other important basic parameters of the motor, such as system hardness, torque, weight, etc. This system uses ABB’s variable frequency motor.
Finally, select an appropriate frequency converter based on the motor power. In addition, the actual situation of the object being tested must also be taken into consideration, such as whether the rotating load belongs to the heavy-load usage of the frequency converter, etc.
3Software system
System software includes three major categories in total, namely computer control software, touch screen software and PLC software. Among them, the PLC software, as the underlying software, is responsible for the interaction with the computer control software and touch screen software on the upper side, and the interaction with the frequency converter on the lower side. Therefore, from the architecture of the entire software system, it can be defined as a host and slave computer structure.
3.1 System development platform
The software system has two control methods: remote and local. The development platforms for the three major categories of software are Windows operating system, LabVIEW[4] integrated development environment, CodesysV2.3, and CP400.
3.2 System software architecture
The software of the entire system is divided into three types, namely remote control software, PLC control software and local control software. Among them, the remote control software runs under the Windows operating system and is developed under the LabVIEW integrated development environment; the PLC control software is developed under the CodesysV2.3 programming environment; the local control software runs on the touch screen computer and is developed under the CP400 environment. The relationship between the three software is shown in Figure 2.
ROLLS-ROYCE MARINE CCN-01 CANMAN CONTROLLER NETWORK MODULE
ROLLS ROYCE MARINE TENFJORD-AS-PC1010 DISPLAY CONTROLLER
PRECIMA PRODUCTION AB-ROLLS-ROYCE-KAMEWA 1082 WATER JET CONTROL UNIT-2
PRECIMA PRODUCTION AB-ROLLS-ROYCE-KAMEWA 1082 WATER JET CONTROL UNIT-1
PMA KS-94 TYP-9407-923-01001 TEMPERATURE CONTROLLER
PLEIGER ELEKTRONIK 362MC MULTI FUNCTION CONTROLLER
NSD CORPORATION VARILIMIT VS-10G-D-MP LIMIT SWITCH OUTPUT CONTROLLER
NSD CORPORATION VS-10B-UDNP-1-1.1-S002 CONTROLLER
NORIS AUTOMATION SG-2000 SERVO CONTROLLER
NORIS AUTOMATION GMBH-SG-2000 SERVO CONTROLLER
NAKASHIMA PROPELLER THRUSTER CONTROLLER PANEL
MURPHY SR260 SELECTRONIC LOGIC CONTROLLER
MEIYO MFT-06-0920-1 FREQUENCY CONVERTER
LILAAS LF90S-01-157-REV-A SINGLE CONTROL LEVER
LIEBHERR 917871414 X1-034 CAN MODULE
LIEBHERR 917871314 X1-033 CAN MODULE
LIEBHERR 917871114 X1-057-1 CAN MODULE
LIEBHERR 917870914 X1-017 CAN MODULE
LIEBHERR 917857414 X1-009 CAN MODULE
LIEBHERR 917852114 X1-041 CAN MODULE
LIAAEN HELITRON DC0016A IO CONTROLLER-I
LIAAEN HELITRON DC 00178 STEPPER CONTROLLER-1
LESLIE PMC-RS REMOTE SET POINT ELECTRO PNUEMATIC CONTROLLERS
KTE KT-ELECTRIC KT-PWC POWER CONTROLLER
KTE KT-ELECTRIC KT-PPC PROGRAMMABLE POWER CONTROLLER
KT ELECTRIC KT-PPC-PROGRAMMABLE-POWER CONTROLLER UNIT
KONGSBERG NORCONTROL AUTOMATION AUTOCHIEF-4 REMOTE CONTROL SYSTEM
KONGSBERG MARITIME SCU PN-329785 REV.E 336217C SEGMENT CONTROLLER UNIT
KC LTD ICCP SYSTEM IMPRESSED CURRENT CATHODIC PROTECTION CONTROL BOARD
KAWASAKI NABTESCO BTC-305-52 THRUSTER CONTROLLER
KAWASAKI HEAVY INDUSTRIES THRUSTER CONTROLLER
KAMEWA VC1S1 CONVERTER
KAMERA FINLAND TYPE-ACP9-T8000410.2 CONTROLLER PANEL
JRCS JEC-21M ENGINE CONTROLLER
JRC NCE-8000A CONTROLLER
INGERSOLLRAND INTELLISYS SSR-15-100 HP-39817655 AIR COMPRESSOR CONTROLLER
WOODWARD 505 8200-1302
WOODWARD 505 8200-1300
INGERSOLL-RAND E66268 SG INTELLISYS CONTROLLER
INGERSOLL-RAND SSR M22-150 KW INTELLISYS CONTROLLER
INGERSOLL-RAND 39875158 SG INTELLISYS CONTROLLER
IDEC IZUMI FA-2JUNIOR TYPE-PFJ-T162-T082-T081 PROGRAMMABLE CONTROLLER
HYUNDAI ELEVATOR HIDC-N4 ELEVATOR DOOR CONTROLLER BOX
HM STEIN SOHN A-067-7 MTBUS CONTROLLER
HANSHIN PMC-9020 MAIN CONTROLLER
HANSHIN ELECTRONICS HPA-9000 SERIES REMOTE CONTROLLER
GESTRA URR-3-135297K CONTROLLER
FOXBORO 43AP-PA42C-PB-PF PNEUMATIC CONTROLLER
FORTRUST C1000A SPEED CONTROLLER
EUROTHERM 3504 VAF INSTRUMENTS CONTROLLER
EBERLE PLS 511S SPEICHERPROGR STEUERUNG PROGRAMMABLE CONTROLLER
DSE DEEP SEA ELECTRONICS 4410 GENERATOR CONTROLLER
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
