Sale!

35000/22M (138607-01) Temperature monitor BENTLY

¥900.00

35000/22M (138607-01) Temperature monitor BENTLY
Brand: BENTLY
Name: Module
Current: 5A
Voltage: 24V
Mode of use: Hot plug implementation
standard: Import
origin: United States

Category:
  • Email:3221366881@qq.com
  • Phone:+86 17750010683
  • Whatsapp:+8617750010683

Description

35000/22M (138607-01) Temperature monitor BENTLY
35000/22M (138607-01) Temperature monitor BENTLY
Module Clips Drive controller servo moto

35000/22M (138607-01) Temperature monitor BENTLY The 3500 series protection and condition monitoring system is a flexible and scalable platform for continuous online monitoring of the most critical machinery and all other machine assets used in the entire plant process, all of which can be achieved in a comprehensive system.
Reliable and compliant
Compatible and flexible
Communicate with System 1
Available options
Security certification
35000/22M (138607-01) Temperature monitor BENTLY VGA touch screen display module is equipped with a color touch screen and I/O module, which can display important 3500 data in the machine or control room. VGA has 3500 vibration levels, system and alarm event lists, as well as module, channel, and alarm data, and nine custom display options. A pre built “custom” screen for direct, 1X, gap, and alarm settings without the need for configuration, making setup simple. There are two sizes to choose from (10 inches and 15 inches), and you can view data from up to four independent 3500 racks on one monitor. The display module also has multiple installation options, including hinged and latch panel installation. The monitor has obtained hazardous area certification.
Bently Nevada”s 35000/22M (138607-01) Temperature monitor BENTLY Proximitor/Seismic Monitor provides four programmable channels for the 3500 system, receiving inputs from both the Proximitor and seismic sensors. Then, 35000/22M (138607-01) Temperature monitor BENTLY adjusts the signal to provide various vibration and position measurements, and compares the adjusted signal with user programmable alarms. In addition, each channel can be programmed using 3500 rack configuration software to protect the machinery and monitor the condition of radial vibration, thrust position, expansion difference, eccentricity, acceleration, speed, shaft absolute value, and circular acceptance area parameters. The 3500 system can be used as a SIL Level 2 system and has been approved for multiple hazardous areas and specific countries/regions.

Contact: Mr. Lai 
Wechat:17750010683 
Whats app：+86 17750010683 
Skype：+86 17750010683 
QQ: 3221366881 
3221366881@qq.com

https://www.xmamazon.com

https://www.xmamazon.com

Home

Home

https://www.plcdcs.com/

www.module-plc.com/

https://www.ymgk.com

3.2 Upgrading of regulators and control systems

For the upgrade of the regulator, the original excitation control system cabinet structure is retained, and the entire system is upgraded by upgrading the board card. Among them, the CoB main board, MUB measurement board, F10 input and output board, and LCP local control panel were replaced with the PEC800 controller, CCM measurement control interface board, CIo comprehensive input and output board, and ECT excitation system control terminal in the Unitrol6800 system respectively.

For the upgrade of the power cabinet, since the power of the excitation system will not change during the transformation, the N-1 redundant configuration of the five UNL3300 rectifier bridges in the original system has not been changed, but the control and measurement parts of the rectifier bridge have been upgraded. And the fan circuit and power control part of the rectifier bridge have been upgraded. Among them, the signal interface board (PsI) was changed to the rectifier bridge signal interface board (CsI), the circuit breaker of the rectifier bridge panel was changed from CDP to CCP, and the rectifier bridge control interface board (CIN) was changed to the rectifier bridge control board (CCI).

For the upgrade of the demagnetization cabinet, the switch control part was mainly upgraded. By adding a CIo board to the switch cabinet and installing a special power distributor and relay to control the demagnetization switch, the original PsI board was removed. Secondly, in the transformation of the current detection part, the Hall element in the Unitrol5000 system was replaced by the current relay of the Unitrol6800 system.

For the upgrade of the excitation current measurement part, the rectifier side Hall element of the rectifier bridge was replaced with an AC side CT. Relying on the linearity of the CT, the current sharing coefficient of the excitation system was increased to 0.98, so that the role of the rectifier bridge can be fully exerted in the system. . For the upgrade of the fan power supply circuit of the rectifier cabinet, each power cabinet can independently control the power supply of the fans in the cabinet to avoid the problem that if the power circuit relay fails in the original system, all the fans will not work.

3.3Unitrol6800 functional logic configuration points

The Unitrol6800 system adds PT slow-blow judgment logic, and defines the actions of PT slow-blow as alarm and channel switching. The system PT slow-blow logic pressure difference is 2% to ensure sufficient sensitivity. Since some external reasons will cause the sequential increase or decrease of magnetic commands, a special increase or decrease magnetic contact adhesion judgment logic has been added to effectively lock out external causes. At the same time, it can avoid the jitter of the relay on the increase or decrease magnetic circuit and ensure the stability of the circuit. The excitation temperature detection is used to alarm in the system, but it cannot control the system tripping. The tripping intermediate relays K291 and K292 use high-power (≥5w) relays to avoid the problem of tripping of the excitation system due to signal interference.

4 Problems discovered during the transformation and their solutions

After upgrading the excitation system from Unitrol5000 to Unitrol6800, since the partition between the regulator cabinets of the original excitation switch cabinet was removed and the mounting backplate of the regulator was moved forward, the hot air from the excitation switch cabinet will enter the excitation regulator cabinet, causing the cabinet to be damaged. The internal temperature rises, and sometimes the temperature can even reach 45°C. In order to avoid problems caused by high temperatures, partitions were added to reduce the temperature inside the switch cabinet and control the temperature to 30°C.

During the maintenance process, if the grounding carbon brush of the generator is removed, it is easy to cause the rotor grounding relay isoLR275 to malfunction. Therefore, during maintenance, the power supply of the grounding relay will be disconnected and the large shaft in the magnetic cabinet will be short-circuited.

5 Conclusion

Through the transformation of the excitation system, our company not only meets the needs of increasing the generator capacity, but also eliminates the safety hazards of ARCnet failure or flat cable damage in the excitation system of the unit. It can find the fault point during maintenance and prevent the unit from non-stop. event. The new board used in the new excitation system has modular characteristics, which can make online maintenance more convenient, and because the boards use trigger pulse generation communication and optical fiber redundant communication, the stability of information transmission is ensured. Avoid communication failures and damage to pulse lines.

ICS TRIPLEX  TC-303-02-4M0
ICS TRIPLEX  TC-302-02-4M0
ICS TRIPLEX  TC-301-02-6M5
ICS TRIPLEX  TC-301-02-2M5
ICS TRIPLEX  TC-215-02-12M5
ICS TRIPLEX  TC-215-02-10M5
ICS TRIPLEX  TC-215-02-8M5
ICS TRIPLEX  TC-215-02-6M5
ICS TRIPLEX  TC-215-02-4M5
ICS TRIPLEX  TC-205-02-12M5
ICS TRIPLEX  TC-205-02-10M5
ICS TRIPLEX  TC-205-02-8M5
ICS TRIPLEX  TC-205-02-6M5
ICS TRIPLEX  TC-205-02-4M5
ICS TRIPLEX  TC-203-02-12M5
ICS TRIPLEX  TC-203-02-10M5
ICS TRIPLEX  TC-203-02-8M5
ICS TRIPLEX  TC-203-02-6M5
ICS TRIPLEX  TC-203-02-4M5
ICS TRIPLEX  TC-201-02-12M5
ICS TRIPLEX  TC-201-02-8M5
ICS TRIPLEX  TC-201-02-6M5
ICS TRIPLEX  TC-201-02-4M5
ICS TRIPLEX  TC-201-02-2M5
ICS TRIPLEX  TC-011-02-6M0
ICS TRIPLEX  TC-011-02-4M5
ICS TRIPLEX TC-011-02-1M5
ICS TRIPLEX TC-003-02-2M5
ICS TRIPLEX TC-002-02-2M5
ICS TRIPLEX TC-001-02-6M5
ICS TRIPLEX TC-001-02-2M5
ICS TRIPLEX TC-001-02-1M5
ICS TRIPLEX T8903C
ICS TRIPLEX T8902
ICS TRIPLEX  T8901
ICS TRIPLEX  T8380
ICS TRIPLEX  T8273
ICS TRIPLEX  T8272
ICS TRIPLEX  T8271
ICS TRIPLEX  T8270
ICS TRIPLEX   T8194
ICS TRIPLEX   T8293C
ICS TRIPLEX   T8292C
ICS TRIPLEX   T8290C
ICS TRIPLEX   T8891C
ICS TRIPLEX   T8846C
ICS TRIPLEX   T8830C
ICS TRIPLEX  T8800C
ICS TRIPLEX  T8442C
ICS TRIPLEX  T8472C
ICS TRIPLEX  T8451C
ICS TRIPLEX  T8431C
ICS TRIPLEX  T8314C
ICS TRIPLEX  T8312-7C

Company advantage service:
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
All kinds of module card driver controller servo motor servo motor embedded card wires and cables Power module control module is applicable to steel, hydropower, nuclear power, power generation, glass factory, tire factory, rubber, thermal power, paper making, shipping, navigation, etc

ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit

Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts

Related products