Description
SH30701S0001068 Motor installation instructions
SH30701S0001068 Motor installation instructions
Module Clips Drive controller servo moto
SH30701S0001068 Motor is a device that converts electrical energy into mechanical energy.
It uses energized coils (i.e. stator windings) to generate a rotating magnetic field and applies it to the rotor (such as a squirrel cage closed aluminum frame) to form a magnetic electric rotational torque.
SH30701S0001068 Electric motors are divided into DC motors and AC motors according to their power sources. Most electric motors in the power system are AC motors,
which can be synchronous motors or asynchronous motors (the stator magnetic field speed and rotor rotation speed of the motor do not maintain synchronous speed).
The SH30701S0001068 electric motor is mainly composed of a stator and a rotor. The direction of force movement of the energized wires in the magnetic field is related to the direction
of the current and the direction of the magnetic field lines (magnetic field direction). The working principle of an electric motor is that the magnetic field exerts force on the current, causing the motor to rotate.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
In modern production systems, industrial robots and PLCs need to communicate and collaborate to complete production tasks. That is, the industrial robots output signals to the PLC, allowing the PLC to control related equipment to drive the robot’s front-end tools. This article mainly analyzes the communication problems between ABB industrial robots and PLC based on DeviceNet fieldbus technology. DeviceNet is a common network communication method in the field of automation. ABB industrial robots establish a network to communicate with Siemens PLC based on the DeviceNet network.
1Configure DSQC652
There are mainly 5 types of standard I/0 boards commonly used in ABB industrial robots [2]. Except for the different addresses assigned to them during setup, their configuration methods are basically the same. This article mainly analyzes the ABB standard I/0 board DS0C652, which mainly builds communication modules based on the DeviceNet network. The DS0C652 board has a distributed I/O module with 16 digital input and 16 digital output interfaces. The board is installed in the ABB industrial robot control cabinet. First, define the specific operation steps of the DS0C652 board, enter the teach pendant control panel, then enter the configuration menu (Figure 1), select the DeviceNetDevice menu, and add a template to enter Figure 2. ABB standard I/0 board is hung on the DeviceNet network, so the address of the module in the network must be set. The jumpers 6 to 12 of terminal x5 are used to determine the address of the module. The available address range is 10 to 63. Modify the parameters in the template parameters to complete the DS0C652 board settings. Click the drop-down menu to select the “Use value from template” row, select “DS0C65224VDCI/0Device”, and then the parameters that need to be set include the address of the I/0 board in the bus.
Figure 1 Configuring DSQC652
2Configure signals and parameters
After completing the DS0C652 board setting, the I/0 signal setting will be performed. Setting the I/0 signal is the basis for establishing communication with the PLC. The PLC communicates and transmits data with the ABB industrial robot through the I/0 signal and the DS0C652 board. As shown in Figure 3, in the signal configuration interface, there are many default I/0 points after the system is established. Modification is not allowed. Click “Add” to add signals. When setting input and output signals, their address range is 0~15. First, enter the signal menu in the configuration options to set the input and output types, and modify the corresponding parameters. After completing the settings, the computer prompts that you need to restart the settings. If there are multiple signals that need to be defined and the waiting time is long after restarting multiple times, you can click “Cancel” and wait for all signals to be defined before clicking the “Yes” button to restart. After the signal settings are completed, click to select “Input and Output” in the ABB menu to check whether all signals have been set.
Figure 2 Configure DSQC652 parameters
Figure 3 Signal parameter settings
During the signal establishment process, attention should be paid to the DSoC652 port and PLC port addresses used, and the corresponding address table should be established, as shown in Table 1. The robot interacts with the PLC through I/O signals. During the setting process, there must be no errors in the port and address number of the PLC connected to the DSoC652. If the address is set incorrectly, the communication between the robot and the PLC will not work properly.
The entire robot teaching pendant setting process is shown in Figure 4.
Excitation system ABB module 3HAC17151-1
Excitation system ABB module 3HAC17143-1
Excitation system ABB module 3HAC17142-1
Excitation system ABB module 3HAC17127-1
Excitation system ABB module 3HAC17030-3
Excitation system ABB module 3HAC17000-2
Excitation system ABB module 3HAC17000-1
Excitation system ABB module 3HAC16905-1
Excitation system ABB module 3HAC16897-1
Excitation system ABB module 3HAC16831-1
Excitation system ABB module 3HAC16797-1
Excitation system ABB module 3HAC16795-1
Excitation system ABB module 3HAC16794-1
Excitation system ABB module 3HAC16793-1
Excitation system ABB module 3HAC16790-1
Excitation system ABB module 3HAC16789-1
Excitation system ABB module 3HAC16788-1
Excitation system ABB module 3HAC16787-1
Excitation system ABB module 3HAC16786-1
Excitation system ABB module 3HAC16784-1
Excitation system ABB module 3HAC16783-1
Excitation system ABB module 3HAC16782-1
Excitation system ABB module 3HAC16780-5
Excitation system ABB module 3HAC16780-1
Excitation system ABB module 3HAC16704-7
Excitation system ABB module 3HAC16704-1
Excitation system ABB module 3HAC1670-1
Excitation system ABB module 3HAC16672-1
Excitation system ABB module 3HAC16628-3
Excitation system ABB module 3HAC16627-3
Excitation system ABB module 3HAC16626-3
Excitation system ABB module 3HAC16626-2
Excitation system ABB module 3HAC16527-1
Excitation system ABB module 3HAC16416-1
Excitation system ABB module 3HAC16403-1
Excitation system ABB module 3HAC16402-1
Excitation system ABB module 3HAC16331-1
Excitation system ABB module 3HAC16328-1
Excitation system ABB module 3HAC16327-1
Excitation system ABB module 3HAC1629-3
Excitation system ABB module 3HAC16226-1
Excitation system ABB module 3HAC16202-1
Excitation system ABB module 3HAC1618-1
Excitation system ABB module 3HAC16037-1
Excitation system ABB module 3HAC16032-3
Excitation system ABB module 3HAC16014-1/05
Excitation system ABB module 3HAC15999-1
Excitation system ABB module 3HAC15988-1
Excitation system ABB module 3HAC15944-1
Excitation system ABB module 3HAC15879-3
Excitation system ABB module 3HAC15860-1
Excitation system ABB module 3HAC15803-1
Excitation system ABB module 3HAC15734-1
Excitation system ABB module 3HAC15732-1
Excitation system ABB module 3HAC15722-1
Excitation system ABB module 3HAC15716-1
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
