Description
T8403 ICS TRIPLEX Parameter settings
T8403 ICS TRIPLEX Parameter settings
Module Clips Drive controller servo moto
The ICS TRIPLEX T8403 Digital Input Module is a critical component specifically designed for industrial automation and process control systems, produced by ICS Triplex (now part of Honeywell Process Solutions).
This module has a series of advanced functions and features that enable it to play an important role in various industrial environments.
Firstly, the T8403 digital input module has comprehensive automatic diagnosis and self checking functions. This means that it can monitor the status
and performance of modules in real-time, ensuring the stable operation of the system. This automatic diagnostic function greatly improves the reliability and safety of the system.
Secondly, the module has configurable digital input channels. Users can configure input channel parameters based on actual needs, such as over acceleration
threshold. This flexibility enables the T8403 digital input module to adapt to various application scenarios.
In addition, the T8403digital input module also has high reliability. It uses high-quality materials and advanced production processes, and undergoes strict
quality control and testing to ensure stability and reliability in critical applications.
In order to improve system availability, some T8403modules also have redundant input channels. This means that when one input fails, it can be switched to
a backup input to ensure the continuous operation of the system. This redundancy greatly improves the system”s fault tolerance and reliability.
In addition, the T8403 digital input module also has strong anti-interference and anti-interference capabilities. This enables it to work stably in complex
industrial environments without being affected by external interference.
In terms of specific applications, the ICS TRIPLEX digital input module has been widely used in multiple fields. In the power system, it can be used to monitor
digital signals such as the status, current, and voltage of power equipment to ensure the stability and safety of the power grid.
In the chemical industry, the T8403 digital input module can be used to monitor key parameters in chemical processes, ensuring the safety and efficiency
of the production process. In the oil and gas industry, this module can be used to monitor and control various parameters in the oil and gas production process,
Ensure the normal operation of the equipment.
Contact: Mr. Lai
Wechat:17750010683
Whats app：+86 17750010683
Skype：+86 17750010683
QQ: 3221366881
3221366881@qq.com
3.2 Upgrading of regulators and control systems
For the upgrade of the regulator, the original excitation control system cabinet structure is retained, and the entire system is upgraded by upgrading the board card. Among them, the CoB main board, MUB measurement board, F10 input and output board, and LCP local control panel were replaced with the PEC800 controller, CCM measurement control interface board, CIo comprehensive input and output board, and ECT excitation system control terminal in the Unitrol6800 system respectively.
For the upgrade of the power cabinet, since the power of the excitation system will not change during the transformation, the N-1 redundant configuration of the five UNL3300 rectifier bridges in the original system has not been changed, but the control and measurement parts of the rectifier bridge have been upgraded. And the fan circuit and power control part of the rectifier bridge have been upgraded. Among them, the signal interface board (PsI) was changed to the rectifier bridge signal interface board (CsI), the circuit breaker of the rectifier bridge panel was changed from CDP to CCP, and the rectifier bridge control interface board (CIN) was changed to the rectifier bridge control board (CCI).
For the upgrade of the demagnetization cabinet, the switch control part was mainly upgraded. By adding a CIo board to the switch cabinet and installing a special power distributor and relay to control the demagnetization switch, the original PsI board was removed. Secondly, in the transformation of the current detection part, the Hall element in the Unitrol5000 system was replaced by the current relay of the Unitrol6800 system.
For the upgrade of the excitation current measurement part, the rectifier side Hall element of the rectifier bridge was replaced with an AC side CT. Relying on the linearity of the CT, the current sharing coefficient of the excitation system was increased to 0.98, so that the role of the rectifier bridge can be fully exerted in the system. . For the upgrade of the fan power supply circuit of the rectifier cabinet, each power cabinet can independently control the power supply of the fans in the cabinet to avoid the problem that if the power circuit relay fails in the original system, all the fans will not work.
3.3Unitrol6800 functional logic configuration points
The Unitrol6800 system adds PT slow-blow judgment logic, and defines the actions of PT slow-blow as alarm and channel switching. The system PT slow-blow logic pressure difference is 2% to ensure sufficient sensitivity. Since some external reasons will cause the sequential increase or decrease of magnetic commands, a special increase or decrease magnetic contact adhesion judgment logic has been added to effectively lock out external causes. At the same time, it can avoid the jitter of the relay on the increase or decrease magnetic circuit and ensure the stability of the circuit. The excitation temperature detection is used to alarm in the system, but it cannot control the system tripping. The tripping intermediate relays K291 and K292 use high-power (≥5w) relays to avoid the problem of tripping of the excitation system due to signal interference.
4 Problems discovered during the transformation and their solutions
After upgrading the excitation system from Unitrol5000 to Unitrol6800, since the partition between the regulator cabinets of the original excitation switch cabinet was removed and the mounting backplate of the regulator was moved forward, the hot air from the excitation switch cabinet will enter the excitation regulator cabinet, causing the cabinet to be damaged. The internal temperature rises, and sometimes the temperature can even reach 45°C. In order to avoid problems caused by high temperatures, partitions were added to reduce the temperature inside the switch cabinet and control the temperature to 30°C.
During the maintenance process, if the grounding carbon brush of the generator is removed, it is easy to cause the rotor grounding relay isoLR275 to malfunction. Therefore, during maintenance, the power supply of the grounding relay will be disconnected and the large shaft in the magnetic cabinet will be short-circuited.
5 Conclusion
Through the transformation of the excitation system, our company not only meets the needs of increasing the generator capacity, but also eliminates the safety hazards of ARCnet failure or flat cable damage in the excitation system of the unit. It can find the fault point during maintenance and prevent the unit from non-stop. event. The new board used in the new excitation system has modular characteristics, which can make online maintenance more convenient, and because the boards use trigger pulse generation communication and optical fiber redundant communication, the stability of information transmission is ensured. Avoid communication failures and damage to pulse lines.
1756-L83ES GuardLogix5580 Controller
20G11NC072JA0NNNNN drive ABB
SH31002P11A2000 SCHNEIDER servo motor
RETA-01 1-port Ethernet adapter module
MOXA EDS-G308-2SFP switchboard
EL3121 BECKHOFF terminal 1 channel analog input module
1734-OE2C Analog output module
2097-V34PR3-LM Ethernet I/P single drive
SGD7S-5R5A00A002 Single axis He suit driver
1769-OB32 Discrete output source module
MVI56-104S Server communication module
SM-100-30-080-P0-45-S1B1 SCHNEIDER servo motor
ANC-100E AN-X2-AB-DHRIO PROSOFT converter
1756-ENBT/A Ethernet communication module
PXI-8820 NI Intel Celeron processor
SR489-P5-HI-A20-E-H generator management relay
330196-05-30-50-05 Eddy current sensor
SR745-W3-P5-G5-HI Multiwire General Electric Transformer protection system
330500-02-04 Velomitor piezoelectric speed sensor
EL6695 BECKHOFF terminal communication interface
SD831 3BSC610064R1 ABB Power supply
CE03250 KOLLMORGEN servo drive module
CR03250 Z2004H-36121 KOLLMORGEN servo drive module
XVH-330-57MPI-1-10 Touch screen
FBM242 RH916TA FOXBORO discrete output interface module
FBM211 RH914TN Input interface module
FMB237 RH914XS channel isolation Output interface module
NPS-400AB B Fujitsu Power module
330905-00-25-05-02-00 3300 NSv approach probe
330930-065-00-00 3300 XL NSv Proximity Sensor
330905-00-25-05-02-00 3300 NSv approach probe
SJDE-08ANA-OY Yaskawa servo driver
5069-IB16 Digital DC input module 5069IB16
SPM-D2-11 WOODWARD synchronizer
5069-IB16 Digital DC input module 5069IB16
1734-OE4C Analog Output module 1734OE4C
5069-IF8 A-B Simulates the input module 5069IF8
330730-080-01-CN 3300 XL 11 mm extension cable
330703-00-09-10-02-CN 3300 XL 11 mm extension cable
177230-01-01-05 Seismic transmitter
CIMR-G5A4011 YASKAWA AC driver
SD831 3BSC610064R1 Power supply
3625T TRICONEX 3625T Output module number
DCS-CP-P 3ADT220134R0001 Control Panel DCS800
1.Has been engaged in industrial control industry for a long time, with a large number of inventories.
2.Industry leading, price advantage, quality assurance
3.Diversified models and products, and all kinds of rare and discontinued products
4.15 days free replacement for quality problems
ABB — AC 800M controller, Bailey, PM866 controller, IGCT silicon controlled 5SHY 3BHB01 3BHE00 3HNA00 DSQC series
BENTLY — 3500 system/proximitor, front and rear card, sensor, probe, cable 3500/20 3500/61 3500/05-01-02-00-001 3500/40M 176449-01 3500/22M 138607-01
Emerson — modbus card, power panel, controller, power supply, base, power module, switch 1C31,5X00, CE400, A6500-UM, SE3008,1B300,1X00,
EPRO — PR6423 PR6424 PR6425 PR6426 PR9376 PR9268 Data acquisition module, probe, speed sensor, vibration sensor
FOXBORO — FCP270 FCP280 FCM10EF FBM207 P0914TD CP40B FBI10E FBM02 FBM202 FBM207B P0400HE Thermal resistance input/output module, power module, communication module, cable, controller, switch
GE —- IS200/215/220/230/420 DS200/215 IC693/695/697/698 VMICPCI VMIVME 369-HI-R-M-0-0-E 469 module, air switch, I/O module, display, CPU module, power module, converter, CPU board, Ethernet module, integrated protection device, power module, gas turbine card
HIMA — F3 AIO 8/4 01 F3231 F8627X Z7116 F8621A 984862160 F3236 F6217 F7553 DI module, processor module, AI card, pulse encoder
Honeywell — Secure digital output card, program module, analog input card, CPU module, FIM card
MOOG — D136-001-007 Servo valve, controller, module
NI — SCXI-1100 PCI – PXIE – PCIE – SBRIO – CFP-AO-210 USB-6525 Information Acquisition Card, PXI Module, Card
Westinghouse — RTD thermal resistance input module, AI/AO/DI/DO module, power module, control module, base module
Woodward — 9907-164 5466-258 8200-1300 9907-149 9907-838 EASYGEN-3500-5/P2 8440-2145 Regulator, module, controller, governor
YOKOGAWA – Servo module, control cabinet node unit
Main products:
PLC, DCS, CPU module, communication module, input/output module (AI/AO/DI/DO), power module, silicon controlled module, terminal module, PXI module, servo drive, servo motor, industrial display screen, industrial keyboard, controller, encoder, regulator, sensor, I/O board, counting board, optical fiber interface board, acquisition card, gas turbine card, FIM card and other automatic spare parts
